ISO7131CC Datasheet, PDF (1/22 Pages) Texas Instruments – 4242-VPK Small-Footprint and Low-Power Triple and Quad Channels Digital Isolators

www.ti.com
ISO7131CC, ISO7140CC, ISO7140FCC
ISO7141CC, ISO7141FCC
SLLSE83 – APRIL 2013
4242-V_PK Small-Footprint and Low-Power Triple and Quad Channels Digital Isolators
Check for Samples: ISO7131CC, ISO7140CC, ISO7140FCC, ISO7141CC, ISO7141FCC
FEATURES
1
•2 Maximum Signaling Rate: 50 Mbps (with 5V
Supplies)
• Robust Design With Integrated Noise Filter
• Default Output Low Option (Suffix F)
• Low Power Consumption, Typical I_CC per
Channel (with 3.3 V Supplies):
– ISO7131: 1.5 mA at 1 Mbps, 2.6 mA at 25
Mbps
– ISO7140: TBD at 1 Mbps, TBD at 25 Mbps
– ISO7141: TBD at 1 Mbps, TBD at 25 Mbps
• Low Propagation Delay: 23 ns Typical (3.3 V
Supplies)
• Wide Temperature Range: –40°C to 125°C
• 50 kV/µs Transient Immunity, Typical
• Long Life with SiO₂ Isolation Barrier
• Operates From 2.7 V, 3.3 V and 5 V Supply and
Logic Levels
• Small QSOP-16 Package
APPLICATIONS
• General-Purpose Isolation
– Industrial Fieldbus
– Profibus
– Modbus™
– DeviceNet Data Buses
– RS-232, RS-485
– Serial Peripheral Interface
SAFETY AND REGULATORY
APPROVALS
• 2500 V_RMS Isolation for 1 minute per UL 1577
• 4242 V_PK Isolation per DIN EN 60747-5-2 (VDE
0884 Teil 2), 566 V_PK Working Voltage
• CSA Component Acceptance Notice 5A
• IEC 60950-1 and IEC 61010-1 End Equipment
Standard Approvals
• All Approvals Pending
DESCRIPTION
ISO7131, ISO7140, and ISO7141 provide galvanic isolation up to 2500 V_RMS for 1 minute per UL and 4242 V_PK
per VDE. ISO7131 has three channels with two forward and one reverse-direction channels. ISO7140 and
ISO7141 are quad-channel isolators; ISO7140 has four forward, ISO7141 has three forward and one reverse-
direction channel. These devices are capable of 50 Mbps maximum data rate with 5V supplies and 40Mbps
maximum data rate with 3.3V or 2.7V supplies, with integrated filters on the inputs for noise-prone applications.
The suffix F indicates that default output state is low; otherwise, the default output state is high (see Table 1).
Each isolation channel has a logic input and output buffer separated by a silicon dioxide (SiO₂) insulation barrier.
Used in conjunction with isolated power supplies, these devices prevent noise currents on a data bus or other
circuits from entering the local ground and interfering with or damaging sensitive circuitry. The devices have TTL
input thresholds and can operate from 2.7 V, 3.3 V, and 5 V supplies.
PRODUCT
ISO7131CC
ISO7140CC
ISO7140FCC
ISO7141CC
ISO7141FCC
STATUS
Released
Product Preview
Product Preview
Product Preview
Product Preview
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Modbus is a trademark of Gould Inc.
2
UNLESS OTHERWISE NOTED this document contains
PRODUCTION DATA information current as of publication date.
Products conform to specifications per the terms of Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated