INA2134-EP Datasheet, PDF (1/18 Pages) Texas Instruments – AUDIO DIFFERENTIAL LINE RECEIVER 0dB (G = 1)

INA2134-EP
www.ti.com
SBOS595C – MARCH 2012 – REVISED MARCH 2012
AUDIO DIFFERENTIAL LINE RECEIVER 0dB (G = 1)
Check for Samples: INA2134-EP
FEATURES
1
• Single and Dual Versions
• Low Distortion: 0.0005% at f = 1 kHz
• High Slew Rate: 14 V/ms
• Fast Settling Time: 3 ms to 0.01%
• Wide Supply Range: ±4 V to ±18 V
• Low Quiescent Current: 3.1 mA max
• High CMRR: 90 dB
• Fixed Gain = 0 dB (1V/V)
• Dual 14-Pin SOIC Package
APPLICATIONS
• Audio Differential Line Receiver
• Summing Amplifier
• Unity-Gain Inverting Amplifier
• Psuedoground Generator
• Instrumentation Building Block
• Current Shunt Monitor
• Voltage-Controlled Current Source
• Ground Loop Eliminator
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
• Controlled Baseline
• One Assembly/Test Site
• One Fabrication Site
• Available in Military (–55°C/125°C)
Temperature Range⁽¹⁾
• Extended Product Life Cycle
• Extended Product-Change Notification
• Product Traceability
D PACKAGE
(TOP VIEW)
NC 1
14 Ref A
–In A 2
+In A 3
13 Out A
A
12 Sense A
V– 4
11 V+
+In B 5
–In B 6
10 Sense B
B
9 Out B
NC 7
8 Ref B
NC = No Connection
(1) Additional temperature ranges available - contact factory
DESCRIPTION
The INA2134 is a differential line receiver consisting of high performance op amps with onchip precision
resistors. The device is fully specified for high performance audio applications and has excellent ac
specifications, including low distortion (0.0005% at 1 kHz) and high slew rate (14 V/ms), assuring good dynamic
response. In addition, wide output voltage swing and high output drive capability allow use in a wide variety of
demanding applications. The dual version features completely independent circuitry for lowest crosstalk and
freedom from interaction, even when overdriven or overloaded.
The INA2134 on-chip resistors are laser trimmed for accurate gain and optimum common-mode rejection.
Furthermore, excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over
temperature. Operation is guaranteed from ±4 V to ±18 V (8-V to 36-V total supply).
The INA2134 comes in a 14-pin SOIC surface-mount package and is specified for operation over the military
temperature range, –55°C to 125°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2012, Texas Instruments Incorporated