|
INA181 Datasheet, PDF (1/32 Pages) Texas Instruments – Bidirectional, Low- and High-Side Voltage Output, Current-Sense Amplifier | |||
|
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
INA181 Bidirectional, Low- and High-Side Voltage Output,
Current-Sense Amplifier
INA181
SBOS793 â APRIL 2017
1 Features
â¢1 Common-Mode Range (VCM): â0.2 V to +26 V
⢠High Bandwidth: 350 kHz
⢠Offset Voltage:
â ±150 µV (Max) at VCM = 0 V
â ±500 µV (Max) at VCM = 12 V
⢠Output Slew Rate: 2 V/µs
⢠Bidirectional Current-Sensing Capability
⢠Accuracy:
â ±1% Gain Error (Max)
â 1-µV/°C Offset Drift (Max)
⢠Gain Options:
â 20 V/V (A1 Devices)
â 50 V/V (A2 Devices)
â 100 V/V (A3 Devices)
â 200 V/V (A4 Devices)
⢠Quiescent Current: 260 µA (Max per Channel)
2 Applications
⢠Motor Control
⢠Battery Monitoring
⢠Power Management
⢠Lighting Control
⢠Overcurrent Detection
3 Description
The INA181 is a family of cost-optimized,
bidirectional, current-sense amplifiers (also called
current-shunt monitors) that sense voltage drops
across current-sense resistors at common-mode
voltages from â0.2 V to +26 V, independent of the
supply voltage. The INA181 integrates a matched
resistor gain network in four, fixed-gain device
options: 20 V/V, 50 V/V, 100 V/V, or 200 V/V. This
matched gain resistor network minimizes gain error
and reduces the temperature drift.
The INA181 operates from a single 2.7-V to 5.5-V
power supply, drawing a maximum of 260 µA of
supply current.
All device options are specified over the extended
operating temperature range of â40°C to +125°C, and
are available in a 6-pin, SOT-23 package.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
INA181
SOT-23 (6)
2.90 mm à 1.60 mm
(1) For all available packages, see the package option addendum
at the end of the datasheet.
Bus Voltage, VCM
Up To 26 V
RSENSE
Load
Power Supply, VS
2.7 V to 5.5 V CBYPASS
0.1 µF
INA181
IN±
IN+
VS
Microcontroller
±
OUT
ADC
+
REF
GND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |