INA180_17 Datasheet, PDF (1/32 Pages) Texas Instruments – INAx180 Low- and High-Side Voltage Output, Current-Sense Amplifier

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
INA180, INA2180
SBOS741A – APRIL 2017 – REVISED AUGUST 2017
INAx180 Low- and High-Side Voltage Output,
Current-Sense Amplifier
1 Features
•1 Common-Mode Range (V_CM): –0.2 V to +26 V
• High Bandwidth: 350 kHz
• Offset Voltage:
– ±150 µV (Max) at V_CM = 0 V
– ±500 µV (Max) at V_CM = 12 V
• Output Slew Rate: 2 V/µs
• Accuracy:
– ±1% Gain Error (Max)
– 1-µV/°C Offset Drift (Max)
• Gain Options:
– 20 V/V (A1 Devices)
– 50 V/V (A2 Devices)
– 100 V/V (A3 Devices)
– 200 V/V (A4 Devices)
• Quiescent Current: 260 µA (Max)
2 Applications
• Motor Control
• Battery Monitoring
• Power Management
• Lighting Control
• Overcurrent Detection
• Solar Inverters
3 Description
The INA180 and INA2180 (INAx180) current sense
amplifiers are designed for cost-optimized
applications. These devices are part of a family of
current-sense amplifiers (also called current-shunt
monitors) that sense voltage drops across current-
sense resistors at common-mode voltages from –0.2
V to +26 V, independent of the supply voltage. The
INAx180 integrate a matched resistor gain network in
four, fixed-gain device options: 20 V/V, 50 V/V, 100
V/V, or 200 V/V. This matched gain resistor network
minimizes gain error and reduces the temperature
drift.
Both the INA180 and INA2180 operate from a single
2.7-V to 5.5-V power supply. The single-channel
INA180 draws a maximum supply current of 260 µA;
whereas, the dual-channel INA2180 draws a
maximum supply current of 520 µA..
The INA180 is available in a 5-pin, SOT-23 package
with two different pin configurations. The INA2180 is
available in an 8-pin VSSOP package. All device
options are specified over the extended operating
temperature range of –40°C to +125°C.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
INA180
INA2180⁽²⁾
SOT-23 (5)
VSSOP (10)
2.90 mm × 1.60 mm
3.00 mm × 3.00 mm
(1) For all available packages, see the package option addendum
at the end of the datasheet.
(2) INA2180 is preview device.
Bus Voltage, VCM
Up To 26 V
RSENSE
Typical Application Circuit
Load
Power Supply, VS
2.7 V to 5.5 V _CBYPASS
0.1 µF
INA2180 (dual-channel)
INA180 (single-channel)
VS
IN±
Microcontroller
±
+
IN+
OUT
ADC
GND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.