English
Language : 

INA180 Datasheet, PDF (1/30 Pages) Texas Instruments – Low- and High-Side Voltage Output, Current-Sense Amplifier
Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
INA180 Low- and High-Side Voltage Output,
Current-Sense Amplifier
INA180
SBOS741 – APRIL 2017
1 Features
•1 Common-Mode Range (VCM): –0.2 V to +26 V
• High Bandwidth: 350 kHz
• Offset Voltage:
– ±150 µV (Max) at VCM = 0 V
– ±500 µV (Max) at VCM = 12 V
• Output Slew Rate: 2 V/µs
• Accuracy:
– ±1% Gain Error (Max)
– 1-µV/°C Offset Drift (Max)
• Gain Options:
– 20 V/V (A1 Devices)
– 50 V/V (A2 Devices)
– 100 V/V (A3 Devices)
– 200 V/V (A4 Devices)
• Quiescent Current: 260 µA (Max)
2 Applications
• Motor Control
• Battery Monitoring
• Power Management
• Lighting Control
• Overcurrent Detection
3 Description
The INA180 is a family of cost-optimized, current-
sense amplifiers (also called current-shunt monitors)
that sense voltage drops across current-sense
resistors at common-mode voltages from –0.2 V to
+26 V, independent of the supply voltage. The
INA180 integrates a matched resistor gain network in
four, fixed-gain device options: 20 V/V, 50 V/V, 100
V/V, or 200 V/V. This matched gain resistor network
minimizes gain error and reduces the temperature
drift.
The INA180 operates from a single 2.7-V to 5.5-V
power supply, drawing a maximum of 260 µA of
supply current.
All device options are specified over the extended
operating temperature range of –40°C to +125°C, and
are available in a 5-pin, SOT-23 package with two
different pin configurations.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
INA180
SOT-23 (5)
2.90 mm × 1.60 mm
(1) For all available packages, see the package option addendum
at the end of the datasheet.
Bus Voltage, VCM
Up To 26 V
RSENSE
Load
Power Supply, VS
2.7 V to 5.5 V CBYPASS
0.1 µF
INA180
IN±
IN+
VS
Microcontroller
±
OUT
ADC
+
GND
Copyright © 2017, Texas Instruments Incorporated
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.