FPD80200_13 Datasheet, PDF (1/4 Pages) Texas Instruments – LCD TV TFT-LCD Timing Controller

OBSOLETE
FPD80200
www.ti.com
SNOSAE3C – MAY 2004 – REVISED APRIL 2013
FPD80200 LCD TV TFT-LCD Timing Controller with PPDS™ Interface
Check for Samples: FPD80200
FEATURES
1
•2 Targeted at WXGA (1280x768) and HDTV
(1366x768) Applications for LCD TV
• Differential Point-to-Point Interface to Column
Drivers
• 10-Bit Resolution LUT for Digital Independent
Gamma Support
• Response Time Compensation Support (8-8-8)
Includes External DDR Memory Interface
• Single FPD-Link™ Input Bus for High Speed,
Low EMI
• 90 MHz Input Clock Rate
• Operating Supply Range: V_cc = 2.25 to 2.75V
• Optional 3.3V Outputs to Support Row Driver
Compatibility
• Optional EEPROM Programming Allows
Finetuning in Development and Production
Environments (24LC64 or Equivalent)
• EDID Version 1.3 and 2.0 Supported with the
Optional EEPROM
• Internal Pattern Generation for Panel Self-Test
• Supports Data Configuration for 384 or 414
Output Column Drivers
• 144-Pin LQFP Package
DESCRIPTION
The FPD80200 timing controllers (TCONs) are
designed to meet the needs of today’s advanced LCD
TV applications. The FPD80200 supports both WXGA
(1280 x 768) and WXGA+ (1366 x 768) resolutions
with true 8-bit color (16.7 million colors).
When combined with the FPD48084 column driver,
the FPD80200 provides true independent gamma
curves for the red, green, and blue subpixels through
internal lookup tables (LUTs). The FPD80200 also
uses an advanced Response Time Compensation
algorithm to improve the motion video performance of
the LCD panel.
The FPD80200 TCONs incorporate TI's PPDS™
interface (Point to Point Differential Signaling) that
enables advanced features, independent column
driver control, large panel sizes, and lower overall
system cost.
Panel timing and control parameters can be
programmed into an internal ROM for production or
changed using and external EEPROM for initial
product development.
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2004–2013, Texas Instruments Incorporated