|
DS90UB960-Q1 Datasheet, PDF (1/6 Pages) Texas Instruments – Quad 2MP Camera Hub FPD-Link III Deserializer | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DS90UB960-Q1 Quad 2MP Camera Hub
FPD-Link III Deserializer With Dual MIPI CSI-2 Ports
DS90UB960-Q1
SNLS492 â SEPTEMBER 2016
1 Features
â¢1 AEC-Q100 Qualified for Automotive Applications:
â Device Temperature Grade 2: â40â to +105â
Ambient Operating Temperature Range
â Device HBM ESD Classification Level ±4 kV
â Device CDM ESD Classification Level C6
⢠Aggregates Data From up to 4 Cameras Over
FPD-Link III Interface
⢠Supports 2-Megapixel Sensors With Full HD
1080p Resolution at 60-Hz Frame Rate
⢠Multi-Camera Synchronization
⢠MIPI DPHY Version 1.2 / CSI-2 Version 1.3
Compliant
â 2Ã CSI-2 Output Ports
â Supports 1, 2, 3, 4 Data Lanes per CSI-2 port
â CSI-2 Data Rate Scalable for 400 Mbps / 800
Mbps / 1.5 Gbps / 1.6 Gbps each Data Lane
â Programmable Data Types
â Four Virtual Channels
â ECC and CRC Generation
⢠Ultra-low Data and Control Path Latency
⢠Supports Single-Ended Coaxial or Shielded
Twisted-Pair (STP) Cable
⢠Adaptive Receive Equalization
⢠I2C With Fast-Mode Plus up to 1 Mbps
⢠Flexible GPIOs for Camera Synchronization and
Diagnostics
⢠Compatible With DS90UB953-Q1, DS90UB913A-
Q1, DS90UB933-Q1 Serializers
⢠CRC protection for internal Data Path
⢠ISO 10605 and IEC 61000-4-2 ESD Compliant
2 Applications
⢠Automotive ADAS
â Rear View Cameras (RVC)
â Surround View Systems (SVS)
â Camera Monitoring Systems (CMS)
â Forward Vision Cameras (FC)
â Driver Monitoring Systems (DMS)
â Satellite RADAR Modules
⢠Security and Surveillance
3 Description
The DS90UB960-Q1 is a versatile camera hub
capable of connecting serialized camera data
received from 4 independent video datastreams via
an FPD-Link III interface. When paired with
DS90UB953-Q1 serializer, the DS90UB960-Q1
receives data from imagers supporting full HD
1080p/2MP resolution at 60-Hz frame rates. When
coupled with DS90UB913A-Q1/933-Q1 serializers,
DS90UB960-Q1 receives data from image sensors
supporting 720p/800p/960p/1MP resolution at 60-Hz
frame rates. Data is received and aggregated into a
MIPI CSI-2 compliant output for interconnect to a
downstream processor. A second MIPI CSI-2 output
port is available to provide additional bandwidth, or
offers a second replicated output for data-logging and
parallel processing.
The DS90UB960-Q1 includes 4 FPD-Link III
deserializers, each enabling a connection via cost-
effective 50-Ω single-ended coaxial or 100-Ω
differential STP cables. The receive equalizer
automatically adapts to compensate for cable loss
characteristics, including degradation over time.
Each of the FPD-Link III interfaces also includes a
separate low latency bi-directional control channel
that continuously conveys I2C, GPIOs, and other
control information. General purpose I/O signals such
as those required for camera synchronization and
diagnostics features also make use of this bi-
directional control channel.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DS90UB960-Q1
VQFN (64)
9.00 mm à 9.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Schematic
FPD-Link III
Serializer
FPD-Link III
Serializer
FPD-Link III
Serializer
FPD-Link III
Serializer
FPD-Link III
Coax or STP
MIPI CSI-2
DS90UB960-Q1
FPD-Link III HUB
D3P/N
D2P/N
D1P/N
D0P/N
CLKP/N
I2C
GPIO
INTB
Processor
SoC
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCT PREVIEW Information. Product in design phase of
development. Subject to change or discontinuance without notice.
|
▷ |