DS90LV027_13 Datasheet, PDF (1/10 Pages) Texas Instruments – LVDS Dual High Speed Differential Driver

DS90LV027
www.ti.com
SNLS003C – JUNE 1998 – REVISED APRIL 2013
DS90LV027 LVDS Dual High Speed Differential Driver
Check for Samples: DS90LV027
FEATURES
1
•23 Ultra Low Power Dissipation
• Operating Range above 155 Mbps
• Flow-through pinout simplifies PCB layout
• Conforms to TIA/EIA-644 Standard
• 8-Lead SOIC Package Saves Space
• V_CM ±1V center around 1.2V
• Low Differential Output Swing Typical 340 mV
• Power Off Protection (outputs in high
impedance)
DESCRIPTION
The DS90LV027 is a dual LVDS driver device
optimized for high data rate and low power
applications. The DS90LV027 is a current mode
driver allowing power dissipation to remain low even
at high frequency. In addition, the short circuit fault
current is also minimized. The device is in a 8-lead
SOIC package. The DS90LV027 has a flow-through
design for easy PCB layout. The differential driver
outputs provides low EMI with its low output swings
typically 340 mV. Perfect for high speed transfer of
clock and data. Pair with any of TI's LVDS receivers.
Connection Diagram
Functional Diagram
Figure 1. Dual-In-Line
See Package Number D (R-PDSO-G8)
(1) H = Logic high level
L = Logic low level
X = indeterminant
Truth Table⁽¹⁾
Input/Output
DI
L
H
DI > 0.8V and DI < 2.0V
DO+
L
H
X
DO−
H
L
X
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
TRI-STATE is a registered trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated