English
Language : 

DS90LV027AH_13 Datasheet, PDF (1/14 Pages) Texas Instruments – High Temperature LVDS Dual Differential Driver
NRND
DS90LV027AH
www.ti.com
SNLS206A – SEPTEMBER 2005 – REVISED APRIL 2013
DS90LV027AH High Temperature LVDS Dual Differential Driver
Check for Samples: DS90LV027AH
FEATURES
1
•2 −40°C to +125°C operating temperature range
• >600 Mbps (300MHz) switching rates
• 0.3 ns typical differential skew
• 0.7 ns maximum differential skew
• 3.3V power supply design
• Low power dissipation (46 mW @ 3.3V static)
• Flow-through design simplifies PCB layout
• Power Off Protection (outputs in high
impedance)
• Conforms to TIA/EIA-644 Standard
• 8-Lead SOIC package saves space
DESCRIPTION
The DS90LV027AH is a dual LVDS driver device
optimized for high data rate and low power
applications. The device is designed to support data
rates in excess of 600Mbps (300MHz) utilizing Low
Voltage Differential Signaling (LVDS) technology. The
DS90LV027AH is a current mode driver allowing
power dissipation to remain low even at high
frequency. In addition, the short circuit fault current is
also minimized.
The device is in a 8-lead SOIC package. The
DS90LV027AH has a flow-through design for easy
PCB layout. The differential driver outputs provides
low EMI with its typical low output swing of 360 mV. It
is perfect for high speed transfer of clock and data.
The DS90LV027AH can be paired with its companion
dual line receiver, the DS90LV028AH, or with any of
TI's LVDS receivers, to provide a high-speed point-to-
point LVDS interface.
Connection Diagram
Functional Diagram
Figure 1. Dual-In-Line
See Package Number D (R-PDSO-G8)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated