DS90LV011AH_15 Datasheet, PDF (1/13 Pages) Texas Instruments – High Temperature 3V LVDS Differential Driver

NRND
DS90LV011AH
www.ti.com
SNLS198A – SEPTEMBER 2005 – REVISED APRIL 2013
DS90LV011AH High Temperature 3V LVDS Differential Driver
Check for Samples: DS90LV011AH
FEATURES
1
•2 -40°C to 125°C Operating Temperature Range
• Conforms to TIA/EIA-644-A Standard
• >400Mbps (200MHz) Switching Rates
• 700 ps (100 ps Typical) Maximum Differential
Skew
• 1.5 ns Maximum Propagation Delay
• Single 3.3V Power Supply
• ±350 mV Differential Signaling
• Power Off Protection (Outputs in TRI-STATE)
• Pinout Simplifies PCB Layout
• Low Power Dissipation (23 mW @ 3.3V
Typical)
• SOT-23 5-Lead Package
• Pin Compatible with SN65LVDS1
DESCRIPTION
The DS90LV011AH is an LVDS driver optimized for
high data rate and low power applications. The
DS90LV011AH is a current mode driver allowing
power dissipation to remain low even at high
frequency. In addition, the short circuit fault current is
also minimized. The device is designed to support
data rates in excess of 400Mbps (200MHz) utilizing
Low Voltage Differential Signaling (LVDS)
technology.
The device is offered in a 5-lead SOT-23 package.
The LVDS outputs have been arranged for easy PCB
layout. The differential driver outputs provide low EMI
with its typical low output swing of 350 mV. The
DS90LV011AH can be paired with its companion
single line receiver, the DS90LT012AH, or with any of
TI's LVDS receivers, to provide a high-speed LVDS
interface.
Connection Diagram
Functional Diagram
Figure 1. Top View
See Package Number DBV (R-PDSO-G5)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2013, Texas Instruments Incorporated