DS42MB200TSQ Datasheet, PDF (1/17 Pages) Texas Instruments – DS42MB200 Dual 4.25 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre-Emphasis and Receive Equalization

DS42MB200
www.ti.com
SNOSAT8G – JANUARY 2006 – REVISED APRIL 2013
DS42MB200 Dual 4.25 Gbps 2:1/1:2 CML Mux/Buffer with Transmit Pre-Emphasis and
Receive Equalization
Check for Samples: DS42MB200
FEATURES
1
•2 1– 4.25 Gbps Fully Differential Data Paths
• Fixed Input Equalization
• Programmable Output Pre-emphasis
• Independent Switch and Line Side Pre-
emphasis Controls
• Programmable Switch-side Loopback Mode
• On-chip Terminations
• +3.3V Dupply
• ESD Rating HBM 6 kV
• Lead-less WQFN-48 Package
(7mmx7mmx0.8mm, 0.5mm Pitch)
• –40°C to +85°C Operating Temperature Range
APPLICATIONS
• Backplane Driver or Cable Driver
• Redundancy and Signal Conditioning
Applications
• XAUI
DESCRIPTION
The DS42MB200 is a dual signal conditioning 2:1
multiplexer and 1:2 fan-out buffer designed for use in
backplane redundancy applications. Signal
conditioning features include input equalization and
programmable output pre-emphasis that enable data
communication in FR4 backplanes up to 4.25 Gbps.
Each input stage has a fixed equalizer to reduce ISI
distortion from board traces.
All output drivers have 4 selectable steps of pre-
emphasis to compensate for transmission losses from
long FR4 backplanes and reduce deterministic jitter.
The pre-emphasis levels can be independently
controlled for the line-side and switch-side drivers.
The internal loopback paths from switch-side input to
switch-side output enable at-speed system testing. All
receiver inputs are internally terminated with 100Ω
differential terminating resistors. All driver outputs are
internally terminated with 50Ω to V_CC.
Functional Block Diagram
LO_0 ±
MUX_S0
PRE_L
LI_0 ±
EQ
Port 0
EQ
EQ
PRE_S
PRE_S
SIA_0 ±
SIB_0 ±
LB0A
SOA_0 ±
SOB_0 ±
LB0B
LO_1 ±
MUX_S1
PRE_L
LI_1 ±
EQ
Port 1
EQ
EQ
PRE_S
PRE_S
SIA_1 ±
SIB_1 ±
LB1A
SOA_1 ±
SOB_1 ±
LB1B
PreL_0
PreL_1
PreS_0
PreS_1
Pre-emphasis
Control
PRE_L
PRE_S
VCC
GND
RSV
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated