DS36277TMX Datasheet, PDF (1/18 Pages) Texas Instruments – Dominant Mode Multipoint Transceiver

DS36277
www.ti.com
SNLS086E – JULY 1998 – REVISED APRIL 2013
Dominant Mode Multipoint Transceiver
Check for Samples: DS36277
FEATURES
1
•2 FAILSAFE Receiver, RO = HIGH for:
– OPEN Inputs
– Terminated Inputs
– SHORTED Inputs
• Optimal for Use in SAE J1708 Interfaces
• Compatible with Popular Interface Standards:
– TIA/EIA-485 and TIA/EIA-422-A
– CCITT Recommendation V.11
• Bi-Directional Transceiver
– Designed for Multipoint Transmission
• Wide Bus Common Mode Range
– (−7V to +12V)
• Available in PDIP and SOIC Packages
DESCRIPTION
The DS36277 Dominant Mode Multipoint Transceiver
is designed for use on bi-directional differential
busses. It is optimal for use on Interfaces that utilize
Society of Automotive Engineers (SAE) J1708
Electrical Standard.
The device is similar to standard TIA/EIA-485
transceivers, but differs in enabling scheme. The
Driver's Input is normally externally tied LOW, thus
providing only two states: Active (LOW), or Disabled
(OFF). When the driver is active, the dominant mode
is LOW, conversely, when the driver is disabled, the
bus is pulled HIGH by external bias resistors.
The receiver provides a FAILSAFE feature that
ensures a known output state when the Interface is in
the following conditions: Floating Line, Idle Line (no
active drivers), and Line Fault Conditions (open or
short). The receiver output is HIGH for the following
conditions: Open Inputs, Terminated Inputs (50Ω), or
Shorted Inputs. FAILSAFE is a highly desirable
feature when the transceivers are used with
Asynchronous Controllers such as UARTs.
Connection and Logic Diagram
See Package Number D (R-PDSO-G8)
or
P (R-PDIP-T8)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated