DS25CP104A_15 Datasheet, PDF (1/31 Pages) Texas Instruments – 3.125 Gbps 4x4 LVDS Crosspoint Switch with Transmit Pre-Emphasis and Receive Equalization

DS25CP104A, DS25CP114
www.ti.com
SNLS305C – AUGUST 2008 – REVISED MARCH 2013
DS25CP104A / DS25CP114 3.125 Gbps 4x4 LVDS Crosspoint Switch with Transmit
Pre-Emphasis and Receive Equalization
Check for Samples: DS25CP104A, DS25CP114
FEATURES
1
•2 DC - 3.125 Gbps Low Jitter, Low Skew, Low
Power Operation
• Pin and SMBus Configurable, Fully
Differential, Non-Blocking Architecture
• Pin (Two Levels) and SMBus (Four Levels)
Selectable Pre-Emphasis and Equalization
Eliminate ISI Jitter
• Wide Input Common Mode Range Enables
Easy Interface to CML and LVPECL Drivers
• LOS Circuitry Detects Open Inputs Fault
Condition
• On-Chip 100Ω Input and Output Termination
Minimizes Insertion and Return Losses,
Reduces Component Count, Minimizes Board
Space The DS25CP114 Eliminates the On-Chip
Input Termination for Added Design Flexibility.
• 8 kV ESD on LVDS I/O Pins Protects Adjoining
Components
• Small 6 mm x 6 mm WQFN-40 Space Saving
Package
APPLICATIONS
• SD/HD/3G HD SDI Routers
• OC-48 / STM-16
• InfiniBand and FireWire
DESCRIPTION
The DS25CP104A and DS25CP114 are 3.125 Gbps
4x4 LVDS crosspoint switches optimized for high-
speed signal routing and switching over lossy FR-4
printed circuit board backplanes and balanced cables.
Fully differential signal paths ensure exceptional
signal integrity and noise immunity. The non-blocking
architecture allows connections of any input to any
output or outputs. The switch configuration can be
accomplished via external pins or the System
Management Bus (SMBus) interface.
The DS25CP104A and DS25CP114 feature four
levels (Off, Low, Medium, High) of transmit pre-
emphasis (PE) and four levels (Off, Low, Medium,
High) of receive equalization (EQ) settable via the
SMBus interface. Off and Medium PE levels and Off
and Low EQ levels are settable with the external pins.
In addition, the SMBus circuitry enables the loss of
signal (LOS) monitors that can inform a system of the
presence of an open inputs condition (e.g.
disconnected cable).
Wide input common mode range allows the switch to
accept signals with LVDS, CML and LVPECL levels;
the output levels are LVDS. A very small package
footprint requires a minimal space on the board while
the flow-through pinout allows easy board layout. On
the DS25CP104A each differential input and output is
internally terminated with a 100Ω resistor to lower
return losses, reduce component count and further
minimize board space. For added design flexibility the
100Ω input terminations on the DS25CP114 have
been eliminated. This enables a designer to build
custom crosspoint configurations and distribution
circuits that require a limited multidrop signaling
topology.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2013, Texas Instruments Incorporated