DS08MB200_13 Datasheet, PDF (1/14 Pages) Texas Instruments – Dual 800 Mbps 2:1/1:2 LVDS Mux/Buffer

DS08MB200
www.ti.com
SNLS197D – MAY 2006 – REVISED MARCH 2013
DS08MB200 Dual 800 Mbps 2:1/1:2 LVDS Mux/Buffer
Check for Samples: DS08MB200
FEATURES
1
•2 Up to 800 Mbps Data Rate per Channel
• LVDS/BLVDS/CML/LVPECL Compatible Inputs,
LVDS Compatible Outputs
• Low Output Skew and Jitter
• On-Chip 100Ω Input Termination
• 15 kV ESD Protection on LVDS Inputs/Outputs
• Hot Plug Protection
• Single 3.3V Supply
• Industrial -40 to +85°C Temperature Range
• 48-pin WQFN Package
DESCRIPTION
The DS08MB200 is a dual-port 1 to 2 repeater/buffer
and 2 to 1 multiplexer. High-speed data paths and
flow-through pinout minimize internal device jitter and
simplify board layout. The differential inputs and
outputs interface to LVDS or Bus LVDS signals such
as those on TI's 10-, 16-, and 18- bit Bus LVDS
SerDes, or to CML or LVPECL signals.
The 3.3V supply, CMOS process, and robust I/O
ensure high performance at low power over the entire
industrial -40 to +85°C temperature range.
Typical Application
Switch
Fabric A
Switch
Fabric B
Mux Buffer
FPGA
or
ASIC
Block Diagram
ENA_0
ENB_0
LI_0
SOA_0
SOB_0
ENL_0
LO_0
MUX_S0
SIA_0
Channel 0
Channel 1
SIB_0
Figure 1. DS08MB200 Block Diagram
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006–2013, Texas Instruments Incorporated