DRV8824 Datasheet, PDF (1/22 Pages) Texas Instruments – STEPPER MOTOR CONTROLLER IC

DRV8824
www.ti.com
SLVSA06E – OCTOBER 2009 – REVISED AUGUST 2011
STEPPER MOTOR CONTROLLER IC
Check for Samples: DRV8824
FEATURES
1
•2 PWM Microstepping Motor Driver
– Built-In Microstepping Indexer
– Five-Bit Winding Current Control Allows Up
to 32 Current Levels
– Low MOSFET On-Resistance
• 1.6-A Maximum Drive Current at 24 V, 25°C
• Built-In 3.3-V Reference Output
• 8-V to 45-V Operating Supply Voltage Range
• Thermally Enhanced Surface Mount Package
APPLICATIONS
• Automatic Teller Machines
• Money Handling Machines
• Video Security Cameras
• Printers
• Scanners
• Office Automation Machines
• Gaming Machines
• Factory Automation
• Robotics
DESCRIPTION
The DRV8824 provides an integrated motor driver solution for printers, scanners, and other automated
equipment applications. The device has two H-bridge drivers and a microstepping indexer, and is intended to
drive a bipolar stepper motor. The output driver block for each consists of N-channel power MOSFET’s
configured as full H-bridges to drive the motor windings. The DRV8824 is capable of driving up to 1.6-A of output
current (with proper heatsinking, at 24 V and 25°C).
A simple step/direction interface allows easy interfacing to controller circuits. Pins allow configuration of the
motor in full-step up to 1/32-step modes. Decay mode is programmable.
Internal shutdown functions are provided for overcurrent protection, short circuit protection, undervoltage lockout
and overtemperature.
The DRV8824 is available in a 28-pin HTSSOP package with PowerPAD™ (Eco-friendly: RoHS & no Sb/Br).
PACKAGE ⁽²⁾
PowerPAD™ (HTSSOP) - PWP
ORDERING INFORMATION⁽¹⁾
ORDERABLE PART
NUMBER
Reel of 2000
DRV8824PWPR
TOP-SIDE
MARKING
8824
(1) For the most current packaging and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2009–2011, Texas Instruments Incorporated