DLP9500 Datasheet, PDF (1/54 Pages) Texas Instruments – LVDS Type A DMD

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DLP9500
DLPS025C – AUGUST 2012 – REVISED SEPTEMBER 2015
DLP9500 DLP^® 0.95 1080p 2x LVDS Type A DMD
1 Features
•1 0.95-Inch Diagonal Micromirror Array
– 1920 × 1080 Array of Aluminum, Micrometer-
Sized Mirrors (1080p Resolution)
– 10.8-µm Micromirror Pitch
– ±12° Micromirror Tilt Angle (Relative to Flat
State)
– Designed for Corner Illumination
• Designed for Use With Visible Light
(400 to 700 nm):
– Window Transmission 97% (Single Pass,
Through Two Window Surfaces)
– Micromirror Reflectivity 88%
– Array Diffraction Efficiency 86%
– Array Fill Factor 92%
• Four 16-Bit, Low-Voltage Differential Signaling
(LVDS), Double Data Rate (DDR) Input Data
Buses
• Up to 400-MHz Input Data Clock Rate
• 42.2-mm × 42.2-mm × 7-mm Package Footprint
• Hermetic Package
2 Applications
• Industrial:
– Digital Imaging Lithography
– Laser Marking
– LCD and OLED Repair
– Computer-to-Plate Printers
– SLA 3D Printers
– 3D Scanners for Machine Vision and Factory
Automation
– Flat Panel Lithography
• Medical:
– Phototherapy Devices
– Ophthalmology
– Direct Manufacturing
– Hyperspectral Imaging
– 3D Biometrics
– Confocal Microscopes
• Display:
– 3D Imaging Microscopes
– Adaptive Illumination
– Augmented Reality and Information Overlay
3 Description
The DLP9500 1080p chipset is part of the DLP^®
Discovery™ 4100 platform, which enables high
resolution and high performance spatial light
modulation. The DLP9500 is the digital micromirror
device (DMD) fundamental to the 0.95 1080p chipset.
The DLP Discovery 4100 platform also provides the
highest level of individual micromirror control with the
option for random row addressing. Combined with a
hermetic package, the unique capability and value
offered by DLP9500 makes it well suited to support a
wide variety of industrial, medical, and advanced
display applications.
In addition to the DLP9500 DMD, the 0.95 1080p
chipset includes a dedicated DLPC410 controller
required for high speed pattern rates of >23000 Hz
(1-bit binary) and >1700 Hz (8-bit gray), one unit
DLPR410 (DLP Discovery 4100 Configuration
PROM), and two units DLPA200 (DMD micromirror
drivers).
Reliable function and operation of the DLP9500
requires that it be used in conjunction with the other
components of the chipset. A dedicated chipset
provides developers easier access to the DMD as
well as high speed, independent micromirror control.
DLP9500 is a digitally controlled micro-
electromechanical system (MEMS) spatial light
modulator (SLM). When coupled to an appropriate
optical system, the DLP9500 can be used to
modulate the amplitude, direction, and/or phase of
incoming light.
Device Information ⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DLP9500
LCCC (355)
42.16 mm × 42.16 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Application Schematic
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.