DLP7000UV Datasheet, PDF (1/51 Pages) Texas Instruments – LVDS Type A DMD

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DLP7000UV
DLPS061C – MAY 2015 – REVISED SEPTEMBER 2015
DLP7000UV DLP^® 0.7 UV XGA 2x LVDS Type A DMD
1 Features
•1 0.7-Inch Diagonal Micromirror Array
– 1024 × 768 Array of Aluminum, Micrometer-
Sized Mirrors
– 13.68-µm Micromirror Pitch
– ±12° Micromirror Tilt Angle (Relative to Flat
State)
– Designed for Corner Illumination
• Designed for Use With UV Light (363 to 420 nm):
– Window Transmission 98% (Single Pass,
Through Two Window Surfaces)
– Micromirror Reflectivity 88%
– Array Diffraction Efficiency 85%
– Array Fill Factor 92% (Nominal)
• Two 16-Bit, Low-Voltage Differential Signaling
(LVDS) Double Data Rate (DDR) Input Data
Buses
• Up to 400 MHz Input Data Clock Rate
• 40.64-mm by 31.75-mm by 6.0-mm Package
Footprint
• Hermetic Package
2 Applications
• Industrial
– Direct Imaging Lithography
– Laser Marking and Repair Systems
– Computer-to-Plate Printers
– Rapid Prototyping Machines
– 3D Printers
• Medical
– Ophthalmology
– Photo Therapy
– Hyper-Spectral Imaging
3 Description
DLP7000UV is a digitally controlled MEMS (micro-
electromechanical system) spatial light modulator
(SLM). When coupled to an appropriate optical
system, the DLP7000UV can be used to modulate
the amplitude, direction, and/or phase of incoming
light.
The DLP7000UV DMD is an addition to the DLP
Discovery 4100 platform, which enables very fast
pattern rates combined with high performance spatial
light modulation operating beyond the visible
spectrum into the UVA spectrum (363 nm to 420 nm).
The DLP7000UV digital micromirror device (DMD) is
designed with a special window that is optimized for
UV transmission. The DLP Discovery 4100 platform
also provides the highest level of individual
micromirror control with the option for random row
addressing. Combined with a hermetic package, the
unique capability and value offered by DLP7000UV
makes it well suited to support a wide variety of
industrial, medical, and advanced display
applications.
The DLP7000UV DMD with a hermetic package is
sold with a dedicated DLPC410 controller for high
speed pattern rates of >32000 Hz (1-bit binary) and
>1900 Hz (8-bit gray), one DLPR410 (DLP Discovery
4100 Configuration PROM), and one DLPA200 (DMD
micromirror driver).
Device Information ⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DLP7000UV
LCCC (203) 40.64 mm × 31.75 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Typical Application Diagram
Illumination
Driver
DLPC410
DLP7000UV
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.