DLP5500 Datasheet, PDF (1/46 Pages) Texas Instruments – DLP® 0.55 XGA Series 450 DMD

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DLP5500
DLPS013F – APRIL 2010 – REVISED MAY 2015
DLP5500 DLP^® 0.55 XGA Series 450 DMD
1 Features
•1 0.55-Inch Micromirror Array Diagonal
– 1024 × 768 Array of Aluminum, Micrometer-
Sized Mirrors (XGA Resolution)
– 10.8-µm Micromirror Pitch
– ±12° Micromirror Tilt Angle
(Relative to Flat State)
– Designed for Corner Illumination
• Designed for Use With Broadband Visible Light
(420 nm – 700 nm):
– Window Transmission 97% (Single Pass,
Through Two Window Surfaces)
– Micromirror Reflectivity 88%
– Array Diffraction Efficiency 86%
– Array Fill Factor 92%
• 16-Bit, Low Voltage Differential Signaling (LVDS)
Double Data Rate (DDR) Input Data Bus
• 200 MHz Input Data Clock Rate
• Dedicated DLPC200 Controller for High-Speed
Pattern Rates:
– 5,000 Hz (1-Bit Binary Patterns)
– 500 Hz (8-Bit Grayscale Patterns)
• Series 450 Package Characteristics:
– Thermal Area 18 mm × 12 mm Enabling High
on Screen Lumens (>2000 lm)
– 149 Micro Pin Grid Array Robust Electrical
Connection
– Package Mates to Amphenol InterCon
Systems 450-2.700-L-13.25-149 Socket
2 Applications
• Industrial
– 3D Scanners for Machine Vision and Quality
Control
– 3D Printing
– Direct Imaging Lithography
– Laser Marking and Repair
– Industrial and Medical Imaging
– Medical Instrumentation
– Digital Exposure Systems
• Medical
– Opthamology
– 3D Scanners for Limb and Skin Measurement
– Hyperspectral Imaging
• Displays
– 3D Imaging Microscopes
– Intelligent and Adaptive Lighting
3 Description
Featuring over 750000 micromirrors, the high
resolution DLP5500 (0.55" XGA) digital micromirror
device (DMD) is a spatial light modulator (SLM) that
modulates the amplitude, direction, and/or phase of
incoming light. This advanced light control technology
has numerous applications in the industrial, medical,
and consumer markets. The DLP5500 enables fine
resolution for 3D printing applications.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DLP5500
CPGA (149) 22.30 mm × 32.20 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
4 Typical Application Schematic
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.