DLP4500_16 Datasheet, PDF (1/57 Pages) Texas Instruments – WXGA

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
DLP4500 0.45 WXGA DMD
DLP4500
DLPS028B – APRIL 2013 – REVISED JANUARY 2016
1 Features
•1 0.45-Inch Diagonal Micromirror Array
– 912 × 1140 Resolution Array (>1 Million
Micromirrors)
– Diamond Array Orientation Supports Side
Illumination for Simplified, Efficient Optics
Designs
– Capable of WXGA Resolution Display
– 7.6-μm Micromirror Pitch
– ±12° Tilt Angle
– 5-µs Micromirror Crossover Time
• Highly-Efficient Steering of Visible Light
– Window Transmission Efficiency 96% Nominal
(420 to 700 nm, Single Pass Through Two
Window Surfaces)
– Polarization Independent Aluminum
Micromirrors
– Array Fill Factor 92% Nominal
• Dedicated DLPC350 Controller for Reliable
Operation
– Binary Pattern Rates up to 4 kHz
– Pattern Sequence Mode for Control Over Each
Micromirror in Array
• Integrated Micromirror Driver Circuitry
• 9.10-mm × 20.7-mm Package Footprint for
Portable Instruments
– FQE Package With Simple Connector
Interface
– FQD Package With Enhanced Thermal
Interface
Simplified Diagram
DC Power
RGB Interface
LVDS Interface
USB Interface
I2C Interface
GPIO Interface
OSC
DLPC350
LED
Drivers
Light
Sensor
DDR Interface
JTAG
LEDs
2 Applications
• Machine Vision
– 3D Depth Measurement
– Robotic Guidance
– Inline Surface Inspection
– Pick and Place
– 3D Capture
– Defect Rejection
• Medical Instruments
– 3D Dental Scanners
– Vascular Imaging
• 3D Biometrics
– Fingerprint Identification
– Facial Recognition
• Virtual Gauges
• Augmented Reality
• Interactive Display
• Microscopes
3 Description
The DLP4500 digital micromirror device (DMD) acts
as a spatial light modulator (SLM) to steer visible light
and create patterns with speed, precision, and
efficiency. Featuring high resolution and high
brightness in a compact form factor, the DLP4500
DMD is well-suited for very accurate, portable 3D
machine vision and display solutions used in
industrial, medical, and security applications.
Device Information ⁽¹⁾
PART NUMBER
DLP4500
PACKAGE
LCCC (80) ⁽²⁾
LCCC (98) ⁽³⁾
THERMAL
INTERFACE AREA
None
7 mm x 7 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
(2) FQE package drawing
(3) FQD package drawing
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.