DLP3000_17 Datasheet, PDF (1/37 Pages) Texas Instruments – DLP 0.3 WVGA Series 220 DMD

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DLP3000
DLPS022B – JANUARY 2012 – REVISED MARCH 2015
DLP3000 DLP^® 0.3 WVGA Series 220 DMD
1 Features
•1 0.3-Inch (7.62 mm) Diagonal Micromirror Array
– 608 × 684 Array of Aluminum, Micrometer-
Sized Mirrors Offering up to WVGA Resolution
(854 × 480) Wide Aspect Ratio Display
– 7.6-µm Micromirror Pitch
– ±12° Micromirror Tilt Angle (Relative to Flat
State)
– Side Illumination for Optimized Efficiency
– 5-µs Micromirror Crossover Time
• Highly Efficient in Visible Light (420 to 700 nm):
– Window Transmission 97%
– Micromirror Reflectivity 88%
– Array Diffraction Efficiency 86%
– Array Fill Factor 92%
– Polarization Independent
• Package Footprint of 16.6-mm × 7-mm × 4.6-mm
• Low Power Consumption at 200 mW (Typical)
• Dedicated DLPC300 Controller for Reliable
Operation
• Supports High-Speed Pattern Rates of 4000 Hz
(Binary) and 120 Hz (8-Bit)
• 15-Bit, Double Data Rate (DDR) Input Data Bus
• 60- to 80-MHz Input Data Clock Rate
• Integrated Micromirror Driver Circuitry
• Supports 0°C to 70°C
• Package Mates to PANASONIC AXT550224
Socket
2 Applications
• Machine Vision
• Industrial Inspection
• 3D Scanning Such as Dental Scanners
• 3D Optical Metrology
• Automated Fingerprint Identification
• Face Recognition
• Augmented Reality
• Embedded Display
• Interactive Display
• Information Overlay
• Spectroscopy
• Chemical Analyzers
• Medical Instruments
• Photo-Stimulation
• Virtual Gauges
1
3 Description
The DLP3000 digital micromirror device (DMD) is a
digitally-controlled
micro-opto-electromechanical
system (MOEMS) spatial light modulator (SLM)
optimized for small form-factor applications. When
coupled to an appropriate optical system, the
DLP3000 can be used to modulate the amplitude and
direction of incoming light. The DLP3000 creates
highly flexible light patterns with speed, precision, and
efficiency.
Architecturally, the DLP3000 is a latchable, electrical-
in/optical-out semiconductor device. This architecture
makes the DLP3000 well-suited for use in
applications such as 3D scanning or metrology with
structured light, augmented reality, microscopy,
medical instruments, and spectroscopy. The compact
physical size of the DLP3000 is well-suited for
portable equipment where small form factor and lower
cost are important. The compact package
complements the small size of LEDs to enable highly-
efficient, robust light engines.
The DLP3000 is one of two devices in the DLP^® 0.3
WVGA chipset. Proper function and reliable operation
of the DLP3000 requires that it be used in conjunction
with the DLPC300 controller. See the DLP 0.3 WVGA
chipset data sheet (DLPZ005) for further details.
Device Information⁽¹⁾
PART NUMBER PACKAGE
BODY SIZE (NOM)
DLP3000
LCCC (50) 16.6 mm × 7.0 mm × 4.6 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Simplified Diagram
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.