DAC5652A Datasheet, PDF (1/25 Pages) Texas Instruments – DUAL, 10-BIT 275 MSPS DIGITAL-TO-ANALOG CONVERTER

DAC5652A
www.ti.com
SLAS535D – SEPTEMBER 2007 – REVISED AUGUST 2012
DUAL, 10-BIT 275 MSPS DIGITAL-TO-ANALOG CONVERTER
Check for Samples: DAC5652A
FEATURES
1
• 10-Bit Dual Transmit Digital-to-Analog
Converter (DAC)
• 275 MSPS Update Rate
• Single Supply: 3.0 V to 3.6 V
• High Spurious-Free Dynamic Range (SFDR):
80 dBc at 5 MHz
• High Third-Order Two-Tone Intermodulation
(IMD3): 78 dBc at 15.1 MHz and 16.1 MHz
• Independent or Single Resistor Gain Control
• Dual or Interleaved Data
• On-Chip 1.2-V Reference
• Low Power: 290 mW
• Power-Down Mode: 9 mW
• Package: 48-Pin Thin-Quad Flat Pack (TQFP)
APPLICATIONS
• Cellular Base Transceiver Station Transmit
Channel
– CDMA: W-CDMA, CDMA2000, IS-95
– TDMA: GSM, IS-136, EDGE/UWC-136
• Medical/Test Instrumentation
• Arbitrary Waveform Generators (ARB)
• Direct Digital Synthesis (DDS)
• Cable Modem Termination System (CMTS)
DESCRIPTION
The DAC5652A is a monolithic, dual-channel, 10-bit, high-speed DAC with on-chip voltage reference.
Operating with update rates of up to 275 MSPS, the DAC5652A offers exceptional dynamic performance, tight-
gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication
applications.
Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential analog-
output configurations. External resistors allow scaling of the full-scale output current for each DAC separately or
together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature-compensated
and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.
The DAC5652A has two, 10-bit, parallel input ports with separate clocks and data latches. For flexibility, the
DAC5652A also supports multiplexed data for each DAC on one port when operating in the interleaved mode.
The DAC5652A has been specifically designed for a differential transformer-coupled output with a 50-Ω doubly-
terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output power
of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported.
The DAC5652A is available in a 48-pin TQFP package. Pin compatibility between family members provides 10-
bit (DAC5652A), 12-bit (DAC5662), and 14-bit (DAC5672) resolution. Furthermore, the DAC5652A is pin
compatible to the DAC2900 and AD9763 dual DACs. The device is characterized for operation over the industrial
temperature range of –40°C to 85°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2012, Texas Instruments Incorporated