DAC2904 Datasheet, PDF (1/26 Pages) Burr-Brown (TI) – Dual, 14-Bit, 125MSPS DIGITAL-TO-ANALOG CONVERTER

DAC2904
DAC2904
www.ti.com.............................................................................................................................................. SBAS198C – AUGUST 2001 – REVISED OCTOBER 2009
Dual, 14-Bit, 125MSPS
DIGITAL-TO-ANALOG CONVERTER
Check for Samples: DAC2904
FEATURES
1
•2 125MSPS UPDATE RATE
• SINGLE SUPPLY: +3.3V or +5V
• HIGH SFDR: 78dB at f_OUT = 10MHz
• LOW GLITCH: 2pV-s
• LOW POWER: 310mW
• INTERNAL REFERENCE
• POWER-DOWN MODE: 23mW
DESCRIPTION
The DAC2904 is a monolithic, 14-bit, dual-channel,
high-speed Digital-to-Analog Converter (DAC), and is
optimized to provide high dynamic performance while
dissipating only 310mW.
Operating with high update rates of up to 125MSPS,
the DAC2904 offers exceptional dynamic
performance, and enables the generation of very-high
output frequencies suitable for “Direct IF”
applications. The DAC2904 has been optimized for
communications applications in which separate I and
Q data are processed while maintaining tight-gain
and offset matching.
Each DAC has a high-impedance differential-current
output, suitable for single-ended or differential
analog-output configurations.
APPLICATIONS
• COMMUNICATIONS:
– Base Stations, WLL, WLAN
– Baseband I/Q Modulation
• MEDICAL/TEST INSTRUMENTATION
• ARBITRARY WAVEFORM GENERATORS
(ARB)
• DIRECT DIGITAL SYNTHESIS (DDS)
space
space
The DAC2904 combines high dynamic performance
with a high update rate to create a cost-effective
solution for a wide variety of waveform-synthesis
applications:
• Pin compatibility between family members
provides 10-bit (DAC2900), 12-bit (DAC2902),
and 14-bit (DAC2904) resolution.
• Pin compatible to the AD9767 dual DAC.
• Gain matching is typically 0.5% of full-scale, and
offset matching is specified at 0.02% max.
• The DAC2904 utilizes an advanced CMOS
process; the segmented architecture minimizes
output-glitch energy, and maximizes the dynamic
performance.
• All digital inputs are +3.3V and +5V logic
compatible. The DAC2904 has an internal
reference circuit, and allows use in a multiplying
configuration.
The DAC2904 is available in a TQFP-48 package,
and is specified over the extended industrial
temperature range of –40°C to +85°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2001–2009, Texas Instruments Incorporated