DAC124S085_16 Datasheet, PDF (1/32 Pages) Texas Instruments – DAC124S085 12-Bit Micro Power Quad Digital-to-Analog Converter With Rail-to-Rail Output

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
DAC124S085
SNAS348G – MAY 2006 – REVISED APRIL 2016
DAC124S085 12-Bit Micro Power Quad Digital-to-Analog
Converter With Rail-to-Rail Output
1 Features
•1 Ensured Monotonicity
• Low Power Operation
• Rail-to-Rail Voltage Output
• Power-On Reset to 0 V
• Simultaneous Output Updating
• Wide Power Supply Range: 2.7 V to 5.5 V
• Industry's Smallest Package
• Power-Down Modes
• Resolution: 12 Bits
• INL: ±8 LSB (Maximum)
• DNL: 0.7 to −0.5 LSB (Maximum)
• Setting Time: 8.5 µs (Maximum)
• Zero Code Error: 15 mV (Maximum)
• Full-Scale Error: −0.75% FS (Maximum)
• Supply Power:
– Normal: 1.1 mW at 3 V or 2.4 mW at 5 V
(Typical)
– Power Down: 0.3 µW at 3 V or 0.8 µW at 5 V
(Typical)
2 Applications
• Battery-Powered Instruments
• Digital Gain and Offset Adjustment
• Programmable Voltage and Current Sources
• Programmable Attenuators
3 Description
The DAC124S085 device is a full-featured, general-
purpose, quad, 12-bit, voltage-output, digital-to-
analog converter (DAC) that can operate from a
single 2.7-V to 5.5-V supply and consumes 1.1 mW
at 3 V and 2.4 mW at 5 V. The DAC124S085 is
packaged in 10-pin WSON and VSSOP packages.
The 10-pin SON package makes the DAC124S085
the smallest quad DAC in its class. The on-chip
output amplifier allows rail-to-rail output swing and the
three-wire serial interface operates at clock rates up
to 40 MHz over the entire supply voltage range.
Competitive devices are limited to 25-MHz clock rates
at supply voltages in the 2.7-V to 3.6-V range. The
serial interface is compatible with standard SPI,
QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC124S085 serves all four
channels and can vary in voltage between 1 V and
V_A, providing the widest possible output dynamic
range. The DAC124S085 has a 16-bit input shift
register that controls the outputs to be updated, the
mode of operation, the power-down condition, and
the binary input data. All four outputs can be updated
simultaneously or individually depending on the
setting of the two mode of operation bits.
Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DAC124S085
VSSOP (10)
WSON (10)
3.00 mm × 3.00 mm
3.00 mm × 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
DNL at V_A = 3 V
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.