|
DAC082S085_16 Datasheet, PDF (1/31 Pages) Texas Instruments – DAC082S085 8-Bit Micro Power DUAL Digital-to-Analog Converter With Rail-to-Rail Output | |||
|
Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
DAC082S085
SNAS365G â MAY 2006 â REVISED JUNE 2016
DAC082S085 8-Bit Micro Power DUAL Digital-to-Analog Converter With Rail-to-Rail Output
1 Features
â¢1 Ensured Monotonicity
⢠Low Power Operation
⢠Rail-to-Rail Voltage Output
⢠Power-On Reset to 0 V
⢠Simultaneous Output Updating
⢠Wide Power Supply Range: 2.7 V to 5.5 V
⢠Industry's Smallest Package
⢠Power-Down Modes
⢠Key Specifications:
â Resolution: 8 Bits
â INL: ±0.5 LSB (Maximum)
â DNL: 0.18 / â0.13 LSB (Maximum)
â Settling Time: 4.5 µs (Maximum)
â Zero Code Error: 15 mV (Maximum)
â Full-Scale Error: â0.75% FS (Maximum)
â Supply Power:
â Normal: 0.6 mW (3 V) / 1.6 mW (5 V)
(Typical)
â Power Down: 0.3 µW (3 V) / 0.8 µW (5 V)
(Typical)
2 Applications
⢠Battery-Powered Instruments
⢠Digital Gain and Offset Adjustment
⢠Programmable Voltage and Current Sources
⢠Programmable Attenuators
3 Description
The DAC082S085 device is a full-featured, general-
purpose, DUAL, 8-bit, voltage-output, digital-to-analog
converter (DAC) that can operate from a single 2.7-V
to 5.5-V supply and consumes 0.6 mW at 3 V and 1.6
mW at 5 V. The DAC082S085 is packaged in 10-pin
SON and VSSOP packages. The 10-pin WSON
package makes the DAC082S085 the smallest DUAL
DAC in its class. The on-chip output amplifier allows
rail-to-rail output swing, and the three-wire serial
interface operates at clock rates up to 40 MHz over
the entire supply voltage range. Competitive devices
are limited to 25-MHz clock rates at supply voltages
in the 2.7 V to 3.6 V range. The serial interface is
compatible with standard SPIâ¢, QSPI, MICROWIRE,
and DSP interfaces.
Device Information(1)
PART NUMBER
PACKAGE
BODY SIZE (NOM)
DAC082S085
VSSOP (10)
WSON (10)
3.00 mm à 3.00 mm
3.00 mm à 3.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
DNL at VA = 3 V
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
|
▷ |