CDCLVD2104 Datasheet, PDF (1/21 Pages) Texas Instruments – Dual 1:4 Low Additive Jitter LVDS Buffer

CDCLVD2104
www.ti.com
SCAS903A – JUNE 2010 – REVISED AUGUST 2010
Dual 1:4 Low Additive Jitter LVDS Buffer
Check for Samples: CDCLVD2104
FEATURES
1
• Dual 1:4 Differential Buffer
• Low Additive Jitter <300 fs, RMS in
10 kHz to 20 MHz
• Low Within Bank Output Skew of 35ps (Max)
• Universal Inputs Accept LVDS, LVPECL,
LVCMOS
• One Input Dedicated for Four Output Buffers
• 8 LVDS Outputs, ANSI EIA/TIA-644A Standard
Compatible
• Clock Frequency up to 800 MHz
• 2.375–2.625V Device Power Supply
• LVDS Reference Voltage, V_{AC_REF}, Available for
Capacitive Coupled Inputs
• Industrial Temperature Range –40°C to 85°C
• Packaged in 5mm × 5mm 28-Pin QFN (RHD)
• ESD Protection Exceeds 3 kV HBM, 1 kV CDM
APPLICATIONS
• Telecommunications/Networking
• Medical Imaging
• Test and Measurement Equipment
• Wireless Communications
• General Purpose Clocking
DESCRIPTION
The CDCLVD2104 clock buffer distributes two clock
inputs (IN0, IN1) to a total of 8 pairs of differential
LVDS clock outputs (OUT0, OUT7). Each buffer block
consists of one input and 4 LVDS outputs. The inputs
can either be LVDS, LVPECL, or LVCMOS.
The CDCLVD2104 is specifically designed for driving
50-Ω transmission lines. If the input is in single ended
mode, the appropriate bias voltage (V_{AC_REF}) should
be applied to the unused negative input pin.
Using the control pin (EN), outputs can be either
disabled or enabled. If the EN pin is left open two
buffers with all outputs are enabled, if switched to a
logical "0" both buffers with all outputs are disabled
(static logical “0”), if switched to a logical "1", one
buffer with four outputs is disabled and another buffer
with four outputs is enabled. The part supports a fail
safe function. It incorporates an input hysteresis,
which prevents random oscillation of the outputs in
absence of an input signal.
The device operates in 2.5V supply environment and
is characterized from –40°C to 85°C (ambient
temperature). The CDCLVD2104 is packaged in
small 28-pin, 5-mm × 5-mm QFN package.
200 MHz
Clock
Generator
EN _CDCLVD2104
100 MHz
PHY
DAC4
PHY
ADC4
Figure 1. Application Example
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated