CD74FCT245_16 Datasheet, PDF (1/14 Pages) Texas Instruments – BiCMOS OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

D BiCMOS Technology With Low Quiescent
Power
D Buffered Inputs
D Noninverted Outputs
D Input/Output Isolation From V_CC
D Controlled Output Edge Rates
D 64-mA Output Sink Current
D Output Voltage Swing Limited to 3.7 V
D SCR Latch-Up-Resistant BiCMOS Process
and Circuit Design
D Package Options Include Plastic
Small-Outline (M) and Shrink Small-Outline
(SM) Packages and Standard Plastic (E) DIP
CD74FCT245
BiCMOS OCTAL BUS TRANSCEIVER
WITH 3-STATE OUTPUTS
SCBS721 – JULY 2000
E, M, OR SM PACKAGE
(TOP VIEW)
DIR 1
A1 2
A2 3
A3 4
A4 5
A5 6
A6 7
A7 8
A8 9
GND ¹⁰
20 V_CC
19 OE
18 B1
17 B2
16 B3
15 B4
14 B5
13 B6
12 B7
11 _B8
description
The CD74FCT245 is an octal bus transceiver with 3-state outputs using a small-geometry BiCMOS technology.
The output stages are a combination of bipolar and CMOS transistors that limit the output high level to two diode
drops below V_CC. This resultant lowering of output swing (0 V to 3.7 V) reduces the power-bus ringing [a source
of electromagnetic interference (EMI)] and minimizes V_CC bounce and ground bounce and their effects during
simultaneous output switching. The output configuration also enhances switching speed and is capable of
sinking 64 mA.
The CD74FCT245 allows data transmission from the A bus to the B bus or from the B bus to the A bus,
depending upon the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used
to disable the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The CD74FCT245 is characterized for operation from 0°C to 70°C.
FUNCTION TABLE
INPUTS
OE DIR
OPERATION
L
L
B data to A bus
L
H A data to B bus
H
X
Isolation
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright © 2000, Texas Instruments Incorporated
1