CC1021_16 Datasheet, PDF (1/91 Pages) Texas Instruments – Single Chip Low Power RF Transceiver for Narrowband Systems

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
CC1021
SWRS045D – JANUARY 2006 – REVISED JANUARY 2015
CC1021 Single Chip Low Power RF Transceiver for Narrowband Systems
Not Recommended for New Designs NRND
1 Device Overview
1.1 Features
1
• True Single Chip UHF RF Transceiver
• Frequency Range 402 MHz to 470 MHz and
804 MHz to 960 MHz
• High Sensitivity
– Up to –112 dBm for 38.4 kHz Receiver Channel
Filter Bandwidth
– Up to –106 dBm for 102.4 kHz Receiver
Channel Filter Bandwidth
• Programmable Output Power
• Low Current Consumption
– RX: 19.9 mA
• Low Supply Voltage
– From 2.3 V to 3.6 V
• Very Few External Components Required
• Small Size
– QFN 32 Package
• Pb-Free Package
• Digital RSSI and Carrier Sense Indicator
• Data Rate Up to 153.6 kBaud
• OOK, FSK, and GFSK Data Modulation
• Integrated Bit Synchronizer
• Image Rejection Mixer
• Programmable Frequency
• Automatic Frequency Control (AFC)
• Suitable for Frequency Hopping Systems
• Suited for Systems Targeting Compliance With
EN 300 220, FCC CFR47 Part 15, ARIB STD-T96
• Development Kit Available
• Easy-to-Use Software for Generating the CC1021
Configuration Data
• Fully Compatible With CC1020 for Receiver
Channel Filter Bandwidths of 38.4 kHz and Higher
1.2 Applications
• Low Power UHF Wireless Data Transmitters and
Receivers With Channel Spacings
of 50 kHz or Higher
• 433-, 868-, 915-, 960-MHz ISM/SRD Band
Systems
• AMR – Automatic Meter Reading
• Wireless Alarm and Security Systems
• Home Automation
• Low Power Telemetry
• Automotive (RKE/TPMS)
1.3 Description
The CC1021 device is a true single-chip UHF transceiver designed for very low power and very low
voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical)
and SRD (Short Range Device) frequency bands at 433 MHz, 868 MHz, and 915 MHz, but can easily be
programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 960-MHz
range.
The CC1021 device is especially suited for narrowband systems with channel spacing of 50 kHz and
higher complying with EN 300 220, FCC CFR47 part 15, and ARIB STD-T96.
The CC1021 main operating parameters can be programmed through a serial bus, thus making CC1021 a
very flexible and easy to use transceiver.
In a typical system, CC1021 will be used together with a microcontroller and a few external passive
components.
Table 1-1. Device Information⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
CC1021
VQFNP (32)
7.00 mm × 7.00 mm
(1) For more information, see Section 8, Mechanical Packaging and Orderable Information.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.