BQ771800_16 Datasheet, PDF (1/23 Pages) Texas Instruments – Internal Delay Timer

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
bq771800, bq771801, bq771802
bq771803, bq771807, bq771808
bq771809, bq771815
SLUSAX1D – DECEMBER 2012 – REVISED NOVEMBER 2014
bq7718xy Overvoltage Protection for 2-Series to 5-Series Cell Li-Ion Batteries
with Internal Delay Timer
1 Features
•1 2-, 3-, 4-, and 5-Series Cell Overvoltage
Protection
• Internal Delay Timer
• Fixed OVP Threshold
• High-Accuracy Overvoltage Protection:
± 10 mV
• Low Power Consumption I_CC ≈ 1 µA
(V_CELL(ALL) < V_PROTECT)
• Low Leakage Current Per Cell Input < 100 nA
• Small Package Footprint
– 8-pin QFN (3.00 mm × 4.00 mm)
2 Applications
• Protection in Li-Ion Battery Packs in:
– Power Tools
– UPS Battery Backup
– Light Electric Vehicles (eBike, eScooter, Pedal
Assist Bicycles)
3 Description
The bq7718xy family of products provides an
overvoltage monitor and protector for Li-Ion battery
pack systems. Each cell is monitored independently
for an overvoltage condition. For quicker production-
line testing, the bq7718xy device provides a
Customer Test Mode (CTM) with greatly reduced
delay time.
In the bq7718xy device, an internal delay timer is
initiated upon detection of an overvoltage condition
on any cell. Upon expiration of the delay timer, the
output is triggered into its active state (either high or
low depending on the configuration).
Device Information Table⁽¹⁾
PART NUMBER
PACKAGE
BODY SIZE (NOM)
bq771800
QFN (8)
3.00 mm × 4.00 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet and the Device Comparison Table.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. UNLESS OTHERWISE NOTED, this document contains PRODUCTION
DATA.