AFE5804_17 Datasheet, PDF (1/63 Pages) Texas Instruments – FULLY-INTEGRATED, 8-CHANNEL ANALOG FRONT-END FOR ULTRASOUND 12-Bit, 40MSPS, 101mW/Channel

AFE5804
www.ti.com
SBOS442C – JUNE 2008 – REVISED OCTOBER 2011
FULLY-INTEGRATED, 8-CHANNEL ANALOG FRONT-END FOR ULTRASOUND
0.89nV/√Hz, 12-Bit, 40MSPS, 101mW/Channel
Check for Samples: AFE5804
FEATURES
1
•23 8-Channel Complete Analog Front-End:
– LNA, VCA, PGA, LPF, and ADC
• Mode Control for Power/Noise Optimization:
– Low Noise (Full-Channel):
0.89nV/√Hz (TGC Mode I)
1.23nV/√Hz (TGC Mode II)
1.03nV/√Hz (PW Mode)
– Ultra-Low Power:
101mW/Channel (TGC Mode II)
65mW/Channel (CW Mode)
• Low-Noise Pre-Amp (LNA):
– 0.75nV/√Hz
– 20dB Fixed Gain
– 280mV_PP Linear Input Range
• Variable-Gain Amplifier:
– Gain Control Range: 46dB
• PGA Gain Settings: 20dB, 25dB, 27dB, 30dB
• Low-Pass Filter:
– Selectable BW: 12.5MHz, 17MHz
– 2nd-Order, Bessel
• Gain Error: ±0.5dB
• Channel Matching: ±0.25dB
• Clamping
• Fast Overload Recovery: Two Clock Cycles
• 12-Bit Analog-to-Digital Converter:
– 10MSPS to 50MSPS
– 69dB SNR at 10MHz
– Serial LVDS Interface
• Integrated CW Switch Matrix
• 15mm × 9mm, 135-BGA Package:
– Pb-Free (RoHS-Compliant) and Green
APPLICATIONS
• Medical Imaging, Ultrasound
– Portable Systems
– Battery-Powered Systems
DESCRIPTION
The AFE5804 is a complete analog front-end device
specifically designed for ultrasound systems that
require low power and small size.
The AFE5804 consists of eight channels, including a
low-noise amplifier (LNA), voltage-controlled
attenuator (VCA), programmable gain amplifier
(PGA), low-pass filter (LPF), and a 12-bit
analog-to-digital converter (ADC) with low voltage
differential signaling (LVDS) data outputs.
The LNA gain is set for 20dB gain and has excellent
noise and signal handling capabilities, including fast
overload recovery. VCA gain can vary over a 46dB
range with a 0V to 1.2V control voltage common to all
channels of the AFE5804.
The PGA can be programmed for gains of 20dB,
25dB, 27dB, and 30dB. The internal low-pass filter
can also be programmed to 12.5MHz or 17MHz.
The LVDS outputs of the ADC reduce the number of
interface lines to an ASIC or FPGA, thereby enabling
the high system integration densities desired for
portable systems. The ADC can either be operated
with internal or external references. The ADC also
features a signal-to-noise ratio (SNR) enhancement
mode that can be useful at high gains.
The AFE5804 is available in a 15mm × 9mm,
135-ball BGA package that is Pb-free
(RoHS-compliant) and green. It is specified for
operation from 0°C to +85°C.
SPI
8 Channels ^IN....1
IN8
Logic/Controls
Clamp
LNA
VCA/PGA
and
LPF
CW Switch Matrix (8´10)
I_OUT (10)
12-Bit
ADC
Reference
LVDS
OUT
CH_..1
CH8
AFE5804
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Infineon is a registered trademark of Infineon Technologies.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008–2011, Texas Instruments Incorporated