ADS7044_16 Datasheet, PDF (1/41 Pages) Texas Instruments – Ultra-Low Power, Ultra-Small Size, 12-Bit, 1-MSPS, SAR ADC

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
ADS7044
SBAS682D – NOVEMBER 2014 – REVISED DECEMBER 2015
ADS7044 Ultra-Low Power, Ultra-Small Size, 12-Bit, 1-MSPS, SAR ADC
1 Features
•1 Industry's First SAR ADC with Nanowatt Power
Consumption:
– 261 µW at 1 MSPS with 1.8-V AVDD
– 900 µW at 1 MSPS with 3-V AVDD
– 90 µW at 100 kSPS with 3-V AVDD
– Less than 1 µW at 1 kSPS with 3-V AVDD
• Industry's Smallest SAR ADC:
– X2QFN-8 Package with 2.25-mm² Footprint
• 1-MSPS Throughput with Zero Data Latency
• Wide Operating Range:
– AVDD: 1.65 V to 3.6 V
– DVDD: 1.65 V to 3.6 V (Independent of AVDD)
– Temperature Range: –40°C to 125°C
• Excellent Performance:
– 12-Bit Resolution with NMC
– ±1-LSB (Max) DNL and INL
– 71-dB SNR with 3-V AVDD
– –85-dB THD with 3-V AVDD
• Unipolar, Differential Input Range:
–AVDD to AVDD
• Integrated Offset Calibration
• SPI™-Compatible Serial Interface: 16 MHz
• JESD8-7A Compliant Digital I/O
2 Applications
• Low-Power Data Acquisition
• Battery-Powered Handheld Equipment
• Level Sensors
• Ultrasonic Flow Meters
• Motor Controls
• Wearable Fitness
• Portable Medical Equipment
• Hard Drives
• Glucose Meters
3 Description
The ADS7044 is a 1-MSPS, analog-to-digital
converter (ADC). The device supports a wide analog
input voltage range (±1.65 V to ±3.6 V) and includes
a capacitor-based, successive-approximation register
(SAR) ADC with an inherent sample-and-hold circuit.
The SPI-compatible serial interface is controlled by
the CS and SCLK signals. The input signal is
sampled with the CS falling edge and SCLK is used
for conversion and serial data output. The device
supports a wide digital supply range (1.65 V to 3.6 V),
enabling direct interface to a variety of host
controllers. The device complies with the JESD8-7A
standard for normal DVDD range (1.65 V to 1.95 V).
The device is available in 8-pin, miniature, leaded,
and X2QFN packages and is specified for operation
from –40°C to 125°C. Miniature form-factor and
extremely low-power consumption make this device
suitable for space-constrained, battery-powered
applications.
PART NAME
ADS7044
Device Information⁽¹⁾
PACKAGE
BODY SIZE (NOM)
X2QFN (8)
1.50 mm × 1.50 mm
VSSOP (8)
2.30 mm × 2.00 mm
(1) For all available packages, see the orderable addendum at
the end of the datasheet.
space
space
space
Typical Application
+
R
AVDD AVDD used as
Reference for device
AINP
AVDD
C
Device
+
R
AINM
GND
RUG (8)
1.5mm
Actual Device Size
1.5 x 1.5 x 0.35(H) mm
1.5mm
NOTE: The device is smaller than a 0805
(2012 metric) SMD component.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.