ADC10731 Datasheet, PDF (1/33 Pages) National Semiconductor (TI) – 10-Bit Plus Sign Serial I/O A/D Converters with Mux,

ADC10731, ADC10732, ADC10734, ADC10738
www.ti.com
SNAS081D – MAY 1999 – REVISED MARCH 2013
ADC10731/ADC10732/ADC10734/ADC10738 10-Bit Plus Sign Serial I/O A/D Converters
with Mux, Sample/Hold and Reference
Check for Samples: ADC10731, ADC10732, ADC10734, ADC10738
FEATURES
1
•2 0V to Analog Supply Input Range
• Serial I/O (MICROWIRE Compatible)
• Software or Hardware Power Down
• Analog Input Sample/Hold Function
• Ratiometric or Absolute Voltage Referencing
• No Zero or Full Scale Adjustment Required
• No Missing Codes Over Temperature
• TTL/CMOS Input/Output Compatible
APPLICATIONS
• Medical Instruments
• Portable and Remote Instrumentation
• Test Equipment
KEY SPECIFICATIONS
• Resolution 10 Bits Plus Sign
• Single Supply 5 V
• Power Consumption 37 mW (Max)
• In Power Down Mode 18 μW
• Conversion Time 5 μs (Max)
• Sampling Rate 74 kHz (Max)
• Band-Gap Reference 2.5V ±2% (Max)
DESCRIPTION
The ADC10731, ADC10732 and ADC10734 are
obsolete or on lifetime buy and included for
reference only.
This series of CMOS 10-bit plus sign successive
approximation A/D converters features versatile
analog input multiplexers, sample/hold and a 2.5V
band-gap reference. The 1-, 2-, 4-, or 8-channel
multiplexers can be software configured for single-
ended or differential mode of operation.
An input sample/hold is implemented by a capacitive
reference ladder and sampled-data comparator. This
allows the analog input to vary during the A/D
conversion cycle.
In the differential mode, valid outputs are obtained
even when the negative inputs are greater than the
positive because of the 10-bit plus sign output data
format.
The serial I/O is configured to comply with the
MICROWIRE serial data exchange standard for easy
interface to the COPS and HPC families of
controllers, and can easily interface with standard
shift registers and microprocessors.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1999–2013, Texas Instruments Incorporated