100314 Datasheet, PDF (1/7 Pages) National Semiconductor (TI) – Low Power Quint Differential Line Receiver

OBSOLETE
100314
www.ti.com
SNOS115B – AUGUST 1998 – REVISED APRIL 2013
100314 Low Power Quint Differential Line Receiver
Check for Samples: 100314
FEATURES
1
•2 35% Power Reduction of the 100114
• 2000V ESD Protection
• Pin/Function Compatible with 100114
• Voltage Compensated Operating Range =
−4.2V to −5.7V
• Standard Microcircuit Drawing
– (SMD) 5962-9162901
DESCRIPTION
The 100314 is a monolithic quint differential line
receiver with emitter-follower outputs. An internal
reference supply (V_BB) is available for single-ended
reception. When used in single-ended operation the
apparent input threshold of the true inputs is 25 mV
to 30 mV higher (positive) than the threshold of the
complementary inputs. Unlike other F100K ECL
devices, the inputs do not have input pull-down
resistors.
Active current sources provide common-mode
rejection of 1.0V in either the positive or negative
direction. A defined output state exists if both
inverting and non-inverting inputs are at the same
potential between V_EE and V_CC. The defined state is
logic HIGH on the O_a–O_e outputs.
Logic Symbol
Table 1. PIN DESCRIPTIONS
Pin Names
D_a–D_e
D_a–D_e
O_a–O_e
O_a–O_e
Description
Data Inputs
Inverting Data Inputs
Data Outputs
Complementary Data Outputs
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated