CC2531F128 Datasheet, PDF (9/35 Pages) Texas Instruments – A USB-Enabled System-On-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee Applications

CC2531F128, CC2531F256
www.ti.com
SWRS086A – SEPTEMBER 2009 – REVISED JUNE 2010
16-MHz RC OSCILLATOR
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C and V_DD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
Frequency ⁽¹⁾
16
MHz
Uncalibrated frequency accuracy
±18%
Calibrated frequency accuracy
±0.6% ±1%
Start-up time
Initial calibration time⁽²⁾
10 ms
50
ms
(1) The calibrated 16-MHz RC oscillator frequency is the 32-MHz XTAL frequency divided by 2.
(2) When the 16-MHz RC oscillator is enabled, it is calibrated when a switch from the 16-MHz RC oscillator to the 32-MHz crystal oscillator
is performed while SLEEPCMD.OSC_PD is set to 0.
RSSI/CCA CHARACTERISTICS
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C and V_DD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP
MAX UNIT
RSSI range
100
dB
Absolute uncalibrated RSSI/CCA accuracy
RSSI/CCA offset⁽¹⁾
±4
dB
73
dB
Step size (LSB value)
1
dB
(1) Real RSSI = Register value – offset
FREQEST CHARACTERISTICS
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C and V_DD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX UNIT
FREQEST range
±250
kHz
FREQEST accuracy
FREQEST offset⁽¹⁾
±40
kHz
20
kHz
Step size (LSB value)
7.8
kHz
(1) Real FREQEST = Register value – offset
FREQUENCY SYNTHESIZER CHARACTERISTICS
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C, V_DD = 3 V and f_c = 2440 MHz, unless
otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNIT
At ±1-MHz offset from carrier
–110
Phase noise, unmodulated carrier At ±2-MHz offset from carrier
–117
dBc/Hz
At ±5-MHz offset from carrier
–122
ANALOG TEMPERATURE SENSOR
Measured on Texas Instruments CC2530 EM reference design with T_A = 25°C and V_DD = 3 V, unless otherwise noted.
PARAMETER
TEST CONDITIONS
MIN TYP MAX
UNIT
Output at 25°C
1480
12-bit ADC
Temperature coefficient
4.5
/1°C
Voltage coefficient
Initial accuracy without calibration
Accuracy using 1-point calibration (entire
temperature range)
Measured using integrated ADC, using
internal bandgap voltage reference and
maximum resolution
1
/0.1 V
±10
°C
±5
°C
Current consumption when enabled (ADC
current not included)
0.5
mA
Copyright © 2009–2010, Texas Instruments Incorporated
Submit Documentation Feedback
9
Product Folder Link(s): CC2531F128 CC2531F256