English
Language : 

TCM8000 Datasheet, PDF (8/19 Pages) Texas Instruments – CELLULAR TELEPHONE AUDIO PROCESSOR
TCM8000
CELLULAR TELEPHONE AUDIO PROCESSOR
SCTS041A – D4086, AUGUST 1992 – REVISED APRIL 1993
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 7 V
Input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GND – 0.3 V to VCC + 0.3 V
Ground voltage range, GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to 7 V
Operating free-air temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 25°C to 80°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 100°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: Voltage value is with respect to GND.
recommended operating conditions
VCC
VIH
VIL
TA
Supply voltage
High-level input voltage
Low-level input voltage
Operating free-air temperature
MIN TYP MAX UNIT
4.75
5 5.25 V
3.5
V
0.8 V
– 25
80 °C
electrical characteristics over recommended operating temperature range, VCC = 5 V,
fxtal = 3.58 MHz
ICC
IIH
IIL
fclock
Zi
PARAMETER
Supply current
Standby
Operating
High-level input current
Low-level input current
Serial clock frequency, DCLK
Input impedance, RXIN, RXVI, CTI, ST, TXVI, LIMIN, TXSUM, CIN, TXDA,
EXIN, CMPR, TDI
Midsupply reference voltage, REF
Buffered midsupply reference voltage, VBTX, VBRX
Input current at M1P, M1N, M2P, M2N, RXLIM, TXLIM
TEST CONDITIONS
VI = 5 V
VI = 0 V
f = 1 kHz
f = 1 kHz
MIN MAX
4
14
10
10
200
70
20
2.4 2.6
2.4 2.6
1
UNIT
mA
µA
µA
kHz
kΩ
V
V
µA
transmit path specifications, VCC = 5 V, fxtal = 3.58 MHz
M1/M2 to TXVO, MICTRIM, A1 and A2 configured as unity gain inverting amplifiers, input = 100 mVrms at
1 kHz at M1 or M2 (see Table 1)
Gain, MICTRIM = <1000>
Step size
Positive range
Negative range
PARAMETER
MIN
0.4
3
– 4.5
MAX
±1
0.6
4
– 3.5
UNIT
dB
dB
dB
dB
8
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265