BQ24081 Datasheet, PDF (8/10 Pages) Texas Instruments – bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge Management IC Evaluation Module

List of Materials
5 List of Materials
Table 3 lists the materials required for the bq24081EVM.
www.ti.com
Count
2
1
1
1
1
3
3
1
0
2
1
1
Ref. Designator
C1, C2
D1
D2
J1
J2
JPM1, JPM2, JPM3
R1, R2, R6
R3
R5
R4, R7
U1
--
Table 3. bq24081 EVM Parts List⁽¹⁾
Value
1uF
Red
Green
PTC36SAAN
1.5k
1.13k
Description
Capacitor, Ceramic, 1uF, 16-V, X7R
Diode, LED, Red, 1.8-V, 20-mA, 20-mcd
Diode, LED, Green, 2.1-V, 20-mA, 6-mcd
Terminal Block, 2-pin, 6-A, 3.5mm
Terminal Block, 4-pin, 6-A, 3.5mm
Header, 2-pin, 100mil spacing, (36-pin strip)
Resistor, Chip, 1.5k-Ohms, 1/16-W, 1%
Resistor, Chip, 1.13k-Ohms, 1/16-W, 1%
10k
bq24081DRC
Resistor, Chip, 10k-Ohms, 1/16-W, 1%
IC, Single Chip, Li Ion/Li POL, Charger
PCB, 2 In x 1 In x 0.031 In
Size
0805
0603
0603
0.27 x 0.25
0.55 x 0.25
0.100 inch x 2
0603
0603
0603
0603
DRC10
Part Number
(std)
160-1181-1-ND
160-1183-1-ND
ED1514
ED1516
PTC36SAAN
Std
Std
Std
bq24081DRC
HPA182
Manufacturer
(std)
Liteon
Liteon
OST
OST
Sullins
Std
Std
Std
TI
Any
(1) _Notes:
1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted. All other components can be substituted with
equivalent MFG's components.
8
bq24081EVM 1-A Single-Chip Li-Ion and Li-Pol Charge
Management IC Evaluation Module
SLUU261 – September 2006
Submit Documentation Feedback