THS4012CDGNR Datasheet, PDF (7/35 Pages) Texas Instruments – 290-MHz LOW-DISTORTION HIGH-SPEED AMPLIFIERS

www.ti.com
THS4011
THS4012
SLOS216E – JUNE 1999 – REVISED APRIL 2010
ELECTRICAL CHARACTERISTICS (Continued)
V_CC = ±15 V, R_L = 150 Ω, T_A = 25°C (unless otherwise noted)
PARAMETER
TEST CONDITIONS⁽¹⁾
DYNAMIC PERFORMANCE
Unit-gain bandwidth
Closed loop, R_L = 1 kΩ,
Bandwidth for 0.1-dB flatness Gain = 1
BW
Full-power bandwidth⁽³⁾
SR
Slew rate
V_CC = ±15 V, R_L = 150 Ω,
V_CC = ±5 V, R_L = 150 Ω,
V_CC = ±15 V, R_L = 1 kΩ
Settling time to 0.1%
t_s
Settling time to 0.01%
V_I = –2.5 to 2.5 V, Gain = –1
V_I = –2.5 to 2.5 V, Gain = –1
NOISE/DISTORTION PERFORMANCE
V_CC = ±15 V
V_CC = ±15 V
V_CC = ±5 V
V_CC = ±2.5 V
V_O(PP) = 20 V
V_O(PP) = 20 V
V_CC = ±15 V
V_CC = ±5 V
V_CC = ±15 V
V_CC = ±5 V
THD
V_n
I_n
Total harmonic distortion
Input voltage noise
Input current noise
Differential gain error
Differential phase error
V_CC = ±15 V, f_c = 1 MHz, V_O(PP) = 1 V
V_CC = ±5 V or ±15 V,
f = 10 kHz
V_CC = ±5 V or ±15 V,
f = 10 kHz
Gain = 2, R_L = 150 Ω, NTSC
V_CC = ±15 V
V_CC = ±5 V
Gain = 2, R_L = 150 Ω, NTSC
V_CC = ±15 V
V_CC = ±5 V
(1) Full range = –55°C to 125°C for the M suffix
(2) This parameter is not tested.
(3) Full-power bandwidth = Slew rate/2p V_O(peak)
THS4011M
UNIT
MIN TYP MAX
160 ⁽²⁾
200
70
35
30
2.5
8
300⁽²⁾
400
37
35
90
70
MHz
V/ms
ns
–80
7.5
1
0.006%
0.001%
0.01°
0.002°
dBc
nV/√Hz
pA/√Hz
Copyright © 1999–2010, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Link(s): THS4011 THS4012