SN74AVCA406E_08 Datasheet, PDF (7/20 Pages) Texas Instruments – MMC AND SD CARD VOLTAGE-TRANSLATION TRANSCEIVER

www.ti.com
SN74AVCA406E
MMC AND SD CARD VOLTAGE-TRANSLATION TRANSCEIVER
SCES659C – OCTOBER 2007 – REVISED MARCH 2008
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
V_CCA
V_CCB
Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Voltage range applied to any output
in the high-impedance or power-off state⁽²⁾
V_O
Voltage range applied to any output in the high or low state⁽²⁾⁽³⁾
I_IK
Input clamp current
I_OK
Output clamp current
I_O
Continuous output current
Continuous current through V_CCA, V_CCB, or GND
T_stg Storage temperature range
I/O ports (A port)
I/O ports (B port)
Control inputs
A port
B port
A port
B port
V_I < 0
V_O < 0
MIN
MAX UNIT
–0.5
4.6 V
–0.5
4.6
–0.5
4.6 V
–0.5
4.6
–0.5
4.6
V
–0.5
4.6
–0.5 V_CCA + 0.5 _V
–0.5 V_CCB + 0.5
–50 mA
–50 mA
±50 mA
±100 mA
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input voltage and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The output positive-voltage rating may be exceeded up to 4.6 V maximum if the output current rating is observed.
PACKAGE THERMAL IMPEDANCE
θ_JA
Package thermal impedance⁽¹⁾
(1) The package thermal impedance is calculated in accordance with JESD 51-7.
ZQS package
ZXY package
171.6
193
UNIT
°C/W
Copyright © 2007–2008, Texas Instruments Incorporated
Submit Documentation Feedback
7
Product Folder Link(s): SN74AVCA406E