English
Language : 

LP2953QML-SP_15 Datasheet, PDF (6/26 Pages) Texas Instruments – LP2953QML Adjustable Micropower Low-Dropout Voltage Regulators
LP2953QML, LP2953QML-SP
SNVS395C – NOVEMBER 2010 – REVISED APRIL 2013
www.ti.com
LP2953A Electrical Characteristics DC Parameters (continued)
The following conditions apply, unless otherwise specified. VI = 6V, IL = 1mA, CL = 2.2µF, VO = 5V
Feedback pin is tied to 5V Tap pin. Output pin is tied to Output Sense Pin.
Parameter
Test Conditions
Notes Min Max
IL = 1mA
IL = 50mA
IGnd
Ground Pin Current
IL = 100mA
IGnd
Ground Pin Current at
Dropout
IGnd
Ground Pin Current at
Shutdown
ILimit
Current Limit
ΔVO / ΔPD Thermal Regulation
VRef
Reference Voltage
IL = 250mA
VI = 4.5V, IL = 100µA
VO = 0V
ΔVRef / VRef
Reference Voltage Line
Regulation
VI = 2.5V to 6V
VI = 6V to 30V
ΔVRef / VRef Reference Voltage Load
Regulation
IRef = 0 to 200µA
IB FB
Feedback Pin Bias
Current
IO Sink
Output "Off" Pulldown
Current
See (2)
See (2)
See (2)
See (2)
See (2)
See (2) (3)
See (4)
See (5)
See (6)
170
200
2.0
2.5
6.0
8.0
28
33
210
240
140
1.215
1.205
30
20
500
530
0.2
1.245
1.255
0.1
0.2
0.1
0.2
0.4
0.6
40
60
Units
µA
µA
mA
mA
mA
mA
mA
mA
µA
µA
µA
mA
mA
%/W
V
V
%
%
%
%
%
%
nA
nA
mA
mA
Sub-
groups
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
1
2, 3
1
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
1
2, 3
(2) Ground pin current is the regulator quiescent current. The total current drawn from the source is the sum of the ground pin current,
output load current, and current through the external resistive divider (if used).
(3) VShutdown ≤ 1.1V, VO = VO(Nom).
(4) Thermal regulation is the change in output voltage at a time T after a change in power dissipation, excluding load or line regulation
effects. Specifications are for a 200 mA load pulse at VI = VO(Nom)+15V (3W pulse) for T = 10 mS.
(5) VRef ≤ VO ≤ (VI − 1V), 2.3V ≤ VI ≤ 30V, 100 μA ≤ IL ≤ 250 mA.
(6) VShutdown ≤ 1.1V, VO = VO(Nom).
6
Submit Documentation Feedback
Copyright © 2010–2013, Texas Instruments Incorporated
Product Folder Links: LP2953QML LP2953QML-SP