CC2500_11 Datasheet, PDF (6/96 Pages) Texas Instruments – Low-Cost Low-Power 2.4 GHz RF Transceiver

CC2500
1 Absolute Maximum Ratings
Under no circumstances must the absolute maximum ratings given in Table 1 be violated. Stress
exceeding one or more of the limiting values may cause permanent damage to the device.
Caution! ESD sensitive device.
Precaution should be used when handling
the device in order to prevent permanent
damage.
Parameter
Supply voltage
Voltage on any digital pin
Voltage on the pins RF_P, RF_N
and DCOUPL
Voltage ramp-up rate
Input RF level
Storage temperature range
Solder reflow temperature
ESD
Min
Max
Unit Condition/Note
–0.3
3.9
V
All supply pins must have the same voltage
–0.3
VDD+0.3,
V
max 3.9
–0.3
2.0
V
120
kV/µs
+10
dBm
–50
150
C
260
C According to IPC/JEDEC J-STD-020D
<500
V
According to JEDEC STD 22, method A114,
Human Body Model
Table 1: Absolute Maximum Ratings
2 Operating Conditions
The CC2500 operating conditions are listed in Table 2 below.
Parameter
Operating temperature
Operating supply voltage
Min
Max
Unit Condition/Note
–40
85
C
1.8
3.6
V All supply pins must have the same voltage
Table 2: Operating Conditions
3 General Characteristics
Parameter
Frequency range
Data rate
Min
2400
1.2
1.2
26
Typ
Max
Unit
Condition/Note
2483.5
MHz
There will be spurious signals at n/2·crystal oscillator
frequency (n is an integer number). RF frequencies at
n/2·crystal oscillator frequency should therefore be
avoided (e.g. 2405, 2418, 2431, 2444, 2457, 2470 and
2483 MHz when using a 26 MHz crystal).
500
kBaud 2-FSK
250
kBaud GFSK and OOK
500
kBaud (Shaped) MSK (also known as differential offset
QPSK)
Optional Manchester encoding (the data rate in kbps
will be half the baud rate).
Table 3: General Characteristics
SWRS040C
Page 6 of 89