108335 Datasheet, PDF (6/21 Pages) Texas Instruments – Tiny CMOS Operational Amplifier with Rail-to-Rail Input and Output

10V DC Electrical Characteristics (Continued)
Unless otherwise specified, all limits guaranteed for T_J = 25˚C, V⁺ = 10V, V^− = 0V, V_CM = V_O = V⁺/2 and R_L > 1 MΩ. Bold-
face limits apply at the temperature extremes.
Typ
LMC7111AI LMC7111BI
Symbol
Parameter
Conditions
(Note 5)
Limit
Limit
Units
(Note 6)
(Note 6)
A_VOL
Voltage Gain
Sourcing
500
100 kΩ Load
V/mv
min
Sinking
200
V/mv
I_S
Supply Current
V_O
Output Swing
V⁺ = +10V,
V_O = V⁺/2
V⁺ = 10V
R_L = 100 kΩ
V⁺ = 10V
25
50
65
9.99
9.98
0.01
0.02
9.98
9.9
min
60
µA
75
max
9.98
Vmin
0.02
Vmax
9.9
Vmin
R_L = 10 kΩ
0.02
0.1
0.1
Vmin
10V AC Electrical Characteristics
Unless otherwise specified, all limits guaranteed for T_J = 25˚C, V⁺ = 10V, V^− = 0V, V_CM = V_O = V⁺/2 and R_L > 1 MΩ. Bold-
face limits apply at the temperature extremes.
Symbol
Parameter
SR
GBW
φ_m
G_m
Slew Rate
Gain-Bandwidth Product
Phase Margin
Gain Margin
Input-Referred
Conditions
(Note 8)
f = 1 kHz
Typ
(Note 5)
0.03
50
50
15
110
LMC7111AI
Limit
(Note 6)
LMC7111BI
Limit
(Note 6)
Units
V/µs
kHz
deg
dB
Voltage Noise
Input-Referred
V_CM = 1V
f = 1 kHz
0.03
Current Noise
Note 19: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics.
Note 20: Human body model, 1.5 kΩ in series with 100 pF.
Note 21: Applies to both single-supply and split-supply operation. Continuous short circuit operation at elevated ambient temperature can result in exceeding the
maximum allowed junction temperature at 150˚C.
Note 22: The maximum power dissipation is a function of T_J(max), θ_JA and T_A. The maximum allowable power dissipation at any ambient temperature is P_D =
(T_J(max) − T_A)/θ_JA. All numbers apply for packages soldered directly into a PC board.
Note 23: Typical Values represent the most likely parametric norm.
Note 24: All limits are guaranteed by testing or statistical analysis.
Note 25: V⁺ = 10V, V_CM = 5V and R_L connected to 5V. For Sourcing tests, 5V ≤ V_O ≤ 10V. For Sinking tests, 0.5V ≤ V_O ≤ 5V.
Note 26: Connected as Voltage Follower with 1.0V step input. Number specified is the slower of the positive and negative slew rates. Input referred, V⁺ = 10V and
R_L = 100 kΩ connected to 5V. Amp excited with 1 kHz to produce V_O = 2 V_PP.
Note 27: Operation near absolute maximum limits will adversely affect reliability.
www.national.com
6