TS5A22362_10 Datasheet, PDF (5/27 Pages) Texas Instruments – 0.65-Ω DUAL SPDT ANALOG SWITCHES WITH NEGATIVE SIGNALING CAPABILITY

TS5A22362, TS5A22364
www.ti.com
SCDS261C – MARCH 2008 – REVISED APRIL 2010
ELECTRICAL CHARACTERISTICS FOR 2.5-V SUPPLY⁽¹⁾
V₊ = 2.3 V to 2.7 V, T_A = –40°C to 85°C (unless otherwise noted)
PARAMETER SYMBOL
TEST CONDITIONS
Analog Switch
Analog signal
range
ON-state
resistance
ON-state
resistance match
between
channels
V_COM,
V_NO, V_NC
r_on
V_NC or V_NO = V₊, 1.5 V,
V₊ – 5.5 V
I_COM = –100 mA,
Δr_on
V_NC or V_NO = 1.5 V,
I_COM = –100 mA,
COM to NO or NC,
See Figure 16
COM to NO or NC,
See Figure 16
ON-state
resistance
flatness
Shunt switch
resistance
(TS5A22364
only)
r_on(flat)
V_NC or V_NO = V₊, 1.5 V,
V₊ – 5.5 V
I_COM = –100 mA,
COM to NO or NC,
See Figure 16
r_SH
I_NO or I_NC = 10 mA
NC, NO
OFF leakage
current
(TS5A22362
Only)
I_NC(OFF),
I_NO(OFF)
V_NC = 2.25 V, V₊ – 5.5 V
V_COM = V₊ – 5.5 V, 2.25 V
V_NO = Open
COM to NO
or
V_NO = 2.25 V, V₊ – 5.5 V,
V_{COM =} V₊ – 5.5 V, 2.25 V
V_NC = Open
COM to NC
See Figure 17
COM
ON leakage
current
I_COM(ON)
Digital Control Inputs (IN)⁽²⁾
V_NC and V_NO = Open,
V_COM = V₊,V₊ – 5.5 V,
See Figure 18
Input logic high
V_IH
Input logic low
V_IL
Input leakage
current
I_IH, I_IL
V_IN = V₊ or 0
T_A
25°C
Full
25°C
Full
25°C
Full
Full
25°C
Full
25°C
Full
Full
Full
25°C
Full
V₊
MIN TYP MAX UNIT
V₊ – 5.5
0.65
2.7 V
2.7 V
0.023
0.18
2.7 V
V₊ V
0.94
Ω
1.04
0.11
Ω
0.15
0.46
Ω
0.5
2.7 V
25
–50
50 Ω
50
2.7
–375
nA
375
2.7 V
2.7 V
–50
–375
1.4
–250
–250
50
nA
375
5.5 V
0.6 V
250
nA
250
(1) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(2) All unused digital inputs of the device must be held at V₊ or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
Copyright © 2008–2010, Texas Instruments Incorporated
Submit Documentation Feedback
5
Product Folder Link(s): TS5A22362 TS5A22364