TS3L100_10 Datasheet, PDF (5/26 Pages) Texas Instruments – QUAD SPDT WIDE-BANDWIDTH LAN SWITCH WITH LOW ON-STATE RESISTANCE

TS3L100
QUAD SPDT WIDEĆBANDWIDTH LAN SWITCH
WITH LOW ONĆSTATE RESISTANCE
SCDS161A − MAY 2004 – REVISED OCTOBER 2004
electrical characteristics over recommended
V_CC = 3.3 V + 0.3 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
operating
free-air temperature range,
MIN TYP† MAX UNIT
VIK
E, S
Vhys
E, S
IIH
E, S
IIL
E, S
IOZ‡
IOS§
Ioff
ICC
∆ICC
E, S
ICCD
VCC = 3 V,
IIN = −18 mA
VCC = 3.6 V,
VCC = 3.6 V,
VCC = 3.6 V,
VCC = 3.6 V,
VCC = 0,
VCC = 3.6 V,
VCC = 3.6 V,
VCC = 3.6 V,
VIN = VCC
VIN = GND
VO = 0 to 3.6 V,
VI = 0,
VO = 0 to 0.5 VCC,
VI = 0,
VO = 0 to 3.6 V,
II/O = 0,
One input at VCC − 0.6 V,
Switch OFF
Switch ON
VI = 0
Switch ON or OFF
Other inputs at VCC or GND
I and Y ports open,
VIN input switching 50% duty cycle
−1.8 V
150
mV
±1 µA
±1 µA
±1 µA
50
mA
15 µA
0.1
10 µA
750 µA
0.45
mA/
MHz
CIN
COFF
E, S
I port
Y port
f = 1 MHz
VI = 0,
f = 1 MHz,
Outputs open,
Switch OFF
3
pF
5
pF
10
CON
VI = 0,
f = 1 MHz,
Outputs open,
Switch ON
17
pF
VI = 0 V,
IO = 48 mA
ron
VCC = 3 V
VI = 2 V,
IO = 15 mA
∆ron
VI = 3 V,
Switch ON,
IO = 15 mA
VI, VO, II, and IO refer to I/O pins. VIN refers to the control inputs.
† _{All typical values are at VCC = 3.3 V (unless otherwise noted), TA = 25°C.}
‡ _{For I/O ports, the parameter IOZ includes the input leakage current.}
§ _{The IOS test is applicable to only one ON channel at a time. The duration of this test is less than one second.}
5
7
Ω
10
15
1
Ω
switching characteristics over recommended operating free-air temperature range,
V_CC = 3.3 V + 0.3 V, R_L = 100 Ω, C_L = 35 pF (unless otherwise noted) (see Figure 4)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
MIN MAX UNIT
tON
S
Y
tOFF
S
Y
† _{All typical values are at VCC = 3.3 V (unless otherwise noted), TA = 25°C.}
1 7.5 ns
1 3.5 ns
dynamic characteristics over recommended operating free-air
V_CC = 3.3 V + 0.3 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
XTALK(Diff)
RL = 100 Ω,
f = 10 MHz, see Figure 8,
XTALK
RL = 100 Ω,
f = 30 MHz, see Figure 6
OIRR
RL = 100 Ω,
f = 30 MHz, see Figure 7
BW
RL = 100 Ω, see Figure 5
† _{All typical values are at VCC = 3.3 V (unless otherwise noted), TA = 25°C.}
tr = tf = 2 ns
temperature range,
TYP†
−55
−68
−42
350
UNIT
dB
dB
dB
MHz
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
5