English
Language : 

OPA2333-HT_15 Datasheet, PDF (5/24 Pages) Texas Instruments – 1.8-V MICROPOWER CMOS OPERATIONAL AMPLIFIER ZERO-DRIFT SERIES
OPA2333-HT
www.ti.com
SBOS483H – JULY 2009 – REVISED NOVEMBER 2013
ELECTRICAL CHARACTERISTICS: VS = 1.8 V to 5.5 V
Boldface limits apply over the specified temperature range, TA = –55°C to 210°C. At TA = 25°C, RL = 10 kΩ connected to
VS/2, VCM = VS/2, and VOUT = VS/2 (unless otherwise noted).
PARAMETER
TEST CONDITIONS
TA = –55°C to 125°C
MIN TYP MAX
TA = 175°C(1)
MIN TYP MAX
TA = 210°C (2)
UNIT
MIN TYP MAX
OFFSET
VOLTAGE
Input offset
voltage
VOS
VS = 5 V
2 10
μV
over
temperature
22
26
26 μV
vs
temperature
vs power
supply
dVOS/d
T
PSRR
VS = 1.8 V to 5.5 V
0.02
1
6
0.05
1.2
8
0.05
μV/°C
1.7
11 μV/V
Long-term
stability (3)
See (3)
Channel
separation, dc
0.1
μV/V
INPUT BIAS
CURRENT
Input bias
current
IB
±70 ±200
pA
over
Temperature
±150
±1250
±5300
pA
Input offset
current
IOS
±140 ±400
±700
±10600
pA
NOISE
Input voltage
noise,
f = 0.01 Hz to
1 Hz
0.3
1.0
1.0
μVPP
Input voltage
noise,
f = 0.1 Hz to
10 Hz
1.1
1.5
1.5
μVPP
Input current
noise, f = 10 Hz
in
100
fA/√Hz
INPUT
VOLTAGE
RANGE (4)
Common mode
voltage range
VCM
(V–)
– 0.1
(V+) (V–)
+ 0.1 – 0.25
(V+) (V–)
+ 0.25 – 0.25
(V+)
+ 0.25
V
Common-Mode
Rejection Ratio
CMRR
(V–) – 0.1 V < VCM < (V+) + 0.1 V
102
130
101
91
dB
INPUT
CAPACITANCE
Differential
2
4.25
4.25
pF
Common mode
4
12.25
12.25
pF
OPEN-LOOP
GAIN
Open-loop
voltage gain
FREQUENCY
RESPONSE
AOL
(V–) + 100 mV < VO < (V+) – 100
mV, RL = 10 kΩ
104
130
93
110
85
93
dB
Gain-bandwidth
product
GBW
CL = 100 pF
350
350
350
kHz
Slew rate
SR
G=1
0.16
0.25
0.25
V/μs
(1) Minimum and maximum parameters are characterized for operation at TA = 175°C, but may not be production tested at that
temperature. Production test limits with statistical guardbands are used to ensure high temperature performance.
(2) Minimum and maximum parameters are characterized for operation at TA = 210°C, but may not be production tested at that
temperature. Production test limits with statistical guardbands are used to ensure high temperature performance.
(3) 300-hour life test at 150°C demonstrated randomly distributed variation of approximately 1 μV.
(4) The OPA2333-HT is not intended to be used as a comparator due to its limited differential input range capability.
Copyright © 2009–2013, Texas Instruments Incorporated
Product Folder Links: OPA2333-HT
Submit Documentation Feedback
5