BQ3285 Datasheet, PDF (5/22 Pages) Texas Instruments – Real-Time Clock RTC

bq3285
Programming the RTC
The time-of-day, alarm, and calendar bytes can be writ-
ten in either the BCD or binary format (see Table 2).
These steps may be followed to program the time, alarm,
and calendar:
1. Modify the contents of register B:
a. Write a 1 to the UTI bit to prevent trans-
fers between RTC bytes and user buffer.
b. Write the appropriate value to the data
format (DF) bit to select BCD or binary
format for all time, alarm, and calendar
bytes.
c. Write the appropriate value to the hour
format (HF) bit.
2. Write new values to all the time, alarm, and
calendar locations.
3. Clear the UTI bit to allow update transfers.
On the next update cycle, the RTC updates all 10 bytes
in the selected format.
Address
0
1
2
3
4
5
6
7
8
9
Table 2. Time, Alarm, and Calendar Formats
RTC Bytes
Seconds
Seconds alarm
Minutes
Minutes alarm
Hours, 12-hour format
Hours, 24-hour format
Hours alarm, 12-hour format
Hours alarm, 24-hour format
Day of week (1=Sunday)
Day of month
Month
Year
Decimal
0–59
0–59
0–59
0–59
1–12
0–23
1–12
0–23
1–7
1–31
1–12
0–99
Range
Binary
00H–3BH
00H–3BH
00H–3BH
00H–3BH
01H–OCH AM;
81H–8CH PM
00H–17H
01H–OCH AM;
81H–8CH PM
00H–17H
01H–07H
01H–1FH
01H–0CH
00H–63H
Binary-Coded Decimal
00H–59H
00H–59H
00H–59H
00H–59H
01H–12H AM;
81H–92H PM
00H–23H
01H–12H AM;
81H–92H PM
00H–23H
01H–07H
01H–31H
01H–12H
00H–99H
Jan. 1999 E
5