BQ27531-G1 Datasheet, PDF (5/21 Pages) Texas Instruments – Battery Management Unit Impedance Track Fuel Gauge for Use With the bq2419x Charger Controller

www.ti.com
ELECTRICAL SPECIFICATIONS
bq27531-G1
SLUSBE7 – MARCH 2013
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)⁽¹⁾
PARAMETER
V_REGIN
Regulator input range
V_CE
V_CC
V_IOD
V_BAT
CE input pin
Supply voltage range
Open-drain I/O pins (SDA, SCL, SOC_INT)
BAT input pin
V_I
ESD
T_A
T_stg
Input voltage range to all other pins
(BI/TOUT, TS, SRP, SRN, BSDA, BSCL)
Human-body model (HBM), BAT pin
Human-body model (HBM), all other pins
Operating free-air temperature range
Storage temperature range
VALUE
–0.3 to 5.5
–0.3 to 6.0 ⁽²⁾
–0.3 to V_REGIN + 0.3
–0.3 to 2.75
–0.3 to 5.5
–0.3 to 5.5
–0.3 to 6.0 ⁽²⁾
–0.3 to V_CC + 0.3
1.5
2
–40 to 85
–65 to 150
UNIT
V
V
V
V
V
V
V
V
kV
°C
°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Condition not to exceed 100 hours at 25 °C lifetime.
RECOMMENDED OPERATING CONDITIONS
T_A = -40°C to 85°C, V_REGIN = V_BAT = 3.6V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
V_REGIN
Supply voltage
No operating restrictions
No FLASH writes
C_REGIN
C_LDO25
t_PUCD
External input capacitor for internal
LDO between REGIN and V_SS
External output capacitor for internal
LDO between V_CC and V_SS
Power-up communication delay
Nominal capacitor values specified.
Recommend a 5% ceramic X5R type
capacitor located close to the device.
MIN
TYP
MAX UNIT
2.8
4.5
V
2.45
2.8
0.1
μF
0.47
1
μF
250
ms
SUPPLY CURRENT
T_A = 25°C and V_REGIN = V_BAT = 3.6V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
I_CC ⁽¹⁾
I_SLP+ ⁽¹⁾
I_SLP ⁽¹⁾
I_HIB ⁽¹⁾
Normal operating-mode current
Sleep+ operating mode current
Low-power storage-mode current
Hibernate operating-mode current
Fuel gauge in NORMAL mode.
I_LOAD > Sleep Current
Fuel gauge in SLEEP+ mode.
I_LOAD < Sleep Current
Fuel gauge in SLEEP mode.
I_LOAD < Sleep Current
Fuel gauge in HIBERNATE mode.
I_LOAD < Hibernate Current
(1) Specified by design. Not production tested.
MIN
TYP
MAX UNIT
118
μA
62
μA
23
μA
8
μA
Copyright © 2013, Texas Instruments Incorporated
Product Folder Links :bq27531-G1
Submit Documentation Feedback
5