English
Language : 

TLE2144-EP_15 Datasheet, PDF (4/33 Pages) Texas Instruments – Excalibur™ LOW-NOISE HIGH-SPEED PRECISION OPERATIONAL AMPLIFIER
◁
TLE2141-EP
TLE2142-EP
TLE2144-EP
SLOS577 – MAY 2008........................................................................................................................................................................................................ www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
over operating free-air temperature range (unless otherwise noted)
VCC+
VCC–
VID
VI
II
IO
Supply voltage(2)
Supply voltage
Differential input voltage(3)
Input voltage range (any input)
Input current (each input)
Output current
Total current into VCC+
Total current out of VCC–
Duration of short-circuit current at (or below) 25°C(4)
θJA
Package thermal impedance(5)(6)
D package
DW package
TA
Operating free-air temperature range
Tstg
Storage temperature range(7)
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
22 V
–22 V
±44 V
VCC+ V to (VCC– – 0.3) V
±1 mA
±80 mA
80 mA
80 mA
Unlimited
97.1°C/W
57.3°C/W
–55°C to 125 °C
–65°C to 150 °C
260°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC–.
(3) Differential voltages are at IN+ with respect to IN–. Excessive current flows, if input, are brought below VCC– – 0.3 V.
(4) The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation
rating is not exceeded.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
(7) Long-term high temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of
overall device life. See http://www.ti.com/ep_quality for additional information on enhanced product packaging.
RECOMMENDED OPERATING CONDITIONS
VCC±
VIC
TA
Supply voltage
Common-mode input voltage
Operating free-air temperature
VCC = 5 V
VCC± = ±15 V
MIN
MAX UNIT
±2
±22 V
0
2.7
V
–15
12.7
–55
125 °C
4
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TLE2141-EP TLE2142-EP TLE2144-EP
 ▷