SN74LVC1G374 Datasheet, PDF (4/13 Pages) Texas Instruments – SINGLE D-TYPE FLIP-FLOP WITH 3-STATE OUTPUT

SN74LVC1G374
SINGLE DĆTYPE FLIPĆFLOP
WITH 3ĆSTATE OUTPUT
SCES520A − DECEMBER 2003 − REVISED JUNE 2004
recommended operating conditions (see Note 4)
MIN
MAX
UNIT
VCC Supply voltage
Operating
Data retention only
1.65
5.5
V
1.5
VIH High-level input voltage
VIL Low-level input voltage
VI Input voltage
VO Output voltage
IOH High-level output current
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
VCC = 1.65 V to 1.95 V
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC = 4.5 V to 5.5 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3 V
0.65 × VCC
1.7
V
2
0.7 × VCC
0.35 × VCC
0.7
V
0.8
0.3 × VCC
0
5.5
V
0
VCC
V
−4
−8
−16
mA
−24
IOL Low-level output current
VCC = 4.5 V
VCC = 1.65 V
VCC = 2.3 V
VCC = 3 V
−32
4
8
16
mA
24
VCC = 4.5 V
32
VCC = 1.8 V ± 0.15 V, 2.5 V ± 0.2 V
20
∆t/∆v Input transition rise or fall rate
VCC = 3.3 V ± 0.3 V
10
ns/V
VCC = 5 V ± 0.5 V
5
TA Operating free-air temperature
−40
85
°C
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
4
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265