SN74AUP1T14 Datasheet, PDF (4/11 Pages) Texas Instruments – LOW POWER, 1.8/2.5/3.3-V INPUT, 3.3-V CMOS OUTPUT, SINGLE SCHMITT-TRIGGER INVERTER GATE

SN74AUP1T14
SCES802 – APRIL 2010
www.ti.com
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
over operating free-air temperature range (unless otherwise noted)
MIN
MAX UNIT
V_CC Supply voltage range
V_I
Input voltage range⁽²⁾
V_O
Voltage range applied to any output in the high-impedance or power-off state⁽²⁾
V_O
Output voltage range in the high or low state⁽²⁾
I_IK
Input clamp current
V_I < 0
I_OK
Output clamp current
V_O < 0
I_O
Continuous output current
Continuous current through V_CC or GND
q_JA
Package thermal impedance⁽³⁾
DCK package
T_stg Storage temperature range
–0.5
4.6 V
–0.5
4.6 V
–0.5
4.6 V
–0.5 V_CC + 0.5 V
–50 mA
–50 mA
±20 mA
±50 mA
259 °C/W
–65
150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS⁽¹⁾
MIN MAX UNIT
V_CC Supply voltage
V_I
Input voltage
V_O
Output voltage
I_OH High-level output current
I_OL
Low-level output current
T_A
Operating free-air temperature
V_CC = 2.3 V
V_CC = 3 V
V_CC = 2.3 V
V_CC = 3 V
2.3 3.6 V
0 3.6 V
0 V_CC V
–3.1
mA
–4
3.1
mA
4
–40
85 °C
(1) All unused inputs of the device must be held at V_CC or GND to ensure proper device operation. See the TI application report Implications
of Slow or Floating CMOS Inputs, literature number SCBA004.
4
Submit Documentation Feedback
Product Folder Link(s): SN74AUP1T14
Copyright © 2010, Texas Instruments Incorporated