OPA344UAG4 Datasheet, PDF (4/28 Pages) Texas Instruments – LOW POWER, SINGLE-SUPPLY,RAIL-TO-RAIL OPERATIONAL AMPLIFIERS

ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Supply Voltage, V+ to V- ................................................................... 7.5V
Signal Input Terminals, Voltage⁽²⁾ ..................... (V–) –0.5V to (V+) +0.5V
Current⁽²⁾ .................................................... 10mA
Output Short-Circuit⁽³⁾ .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –65°C to +150°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Tolerance (Human Body Model) ............................................ 4000V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional opera-
tion of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.5V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package.
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper han-
dling and installation procedures can cause damage.
ESD damage can range from subtle performance degrada-
tion to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
PACKAGE/ORDERING INFORMATION⁽¹⁾
PRODUCT
PACKAGE
PACKAGE
DESIGNATOR
SPECIFIED
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER⁽²⁾
TRANSPORT
MEDIA
OPA344NA
"
OPA344UA
"
OPA344PA
SOT23-5
"
SO-8
"
8-Pin Dip
DBV
"
D
"
P
–40°C to +85°C
"
–40°C to +85°C
"
–40° C to +85°C
B44
"
OPA344UA
"
OPA344PA
OPA344NA /250
OPA344NA /3K
OPA344UA
OPA344UA /2K5
OPA344PA
Tape and Reel
Tape and Reel
Rails
Tape and Reel
Rails
OPA2344EA
"
OPA2344UA
"
OPA2344PA
MSOP-8
"
SO-8
"
8-Pin DIP
DGK
"
D
"
P
–40°C to +85°C
"
–40°C to +85°C
"
–40°C to +85°C
C44
"
OPA2344UA
"
OPA2344PA
OPA2344EA /250
OPA2344EA /2K5
OPA2344UA
OPA2344UA /2K5
OPA2344PA
Tape and Reel
Tape and Reel
Rails
Tape and Reel
Rails
OPA4344EA
"
OPA4344UA
"
OPA4344PA
TSSOP-14
"
SO-14
"
14-Pin DIP
PW
–40°C to +85°C
OPA4344EA
OPA4344EA /250
Rails
"
"
"
OPA4344EA /2K5
Tape and Reel
D
–40°C to +85°C
OPA4344UA
OPA4344UA
Rails
"
"
"
OPA4344UA /2K5
Tape and Reel
N
–40°C to +85°C
OPA4344PA
OPA4344PA
Rails
OPA345NA
"
OPA345UA
"
SOT23-5
"
SO-8
"
DBV
"
D
"
–40°C to +85°C
"
–40°C to +85°C
"
A45
"
OPA345UA
"
OPA345NA/250
OPA345NA/3K
OPA345UA
OPA345UA/2K5
Tape and Reel
Tape and Reel
Rails
Tape and Reel
OPA2345EA
"
OPA2345UA
"
MSOP-8
"
SO-8
"
DGK
"
D
"
–40°C to +85°C
"
–40°C to +85°C
"
B45
"
OPA2345UA
"
OPA2345EA/250
OPA2345EA /2K5
OPA2345UA
OPA2345UA /2K5
Tape and Reel
Tape and Reel
Rails
Tape and Reel
OPA4345EA
"
OPA4345UA
"
TSSOP-14
"
SO-14
"
PW
–40°C to +85°C
OPA4345EA
OPA4345EA/250
Tape and Reel
"
"
"
OPA4345EA /2K5
Tape and Reel
D
–40°C to +85°C
OPA4345UA
OPA4345UA
Rails
"
"
"
OPA4345UA /2K5
Tape and Reel
NOTES: (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI web site
at www.ti.com.
(2) Models with a slash (/) are available only in Tape and Reel in the quantities indicated (e.g., /2K5 indicates 2500 devices per reel). Ordering 2500
pieces of “OPA344UA/2K5” will get a single 2500-piece Tape and Reel.
OPA344, 2344, 4344
4
OPA345, 2345, 4345
www.ti.com
SBOS107A