OPA2613 Datasheet, PDF (4/27 Pages) Texas Instruments – Dual, Wideband, High Output Current, Operational Amplifier with Current Limit

OPA2613
SBOS249D − JUNE 2003− REVISED APRIL 2004
www.ti.com
ELECTRICAL CHARACTERISTICS: V_S = ±6V (continued)
Boldface limits are tested at +25°C.
R_F = 402Ω, R_L = 100Ω, and G = +2, unless otherwise noted. See Figure 1 for AC performance only.
OPA2613ID, OPA2613IDTJ
PARAMETER
Power Supply
Specified Operating Voltage
Maximum Operating Voltage Range
Maximum Quiescent Current
Minimum Quiescent Current
Power-Supply Rejection Ratio (−PSRR)
TEST CONDITIONS
VS = ±6V, both channels
VS = ±6V, both channels
Input Referred
TYP
+25°C
MIN/MAX OVER TEMPERATURE
0°C to −40°C to
+25°C(1) +70°C(2) +85°C(2) UNITS
TEST
MIN/ LEVEL
MAX (3)
±6
V
typ
C
±6.3
±6.3
±6.3
V
max
A
12
12.4
12.8
13
mA
max
A
12
11.6
11.2
11
mA
min
A
95
90
88
87
dB
min
A
Thermal Characteristics
Specified Operating Range D Package
Thermal Resistance, q_JA
D
SO-8
DTJ PSO-8
Junction-to-Ambient
−40 to
+85
125
50(6)
°C
typ
C
°C/W typ
C
°C/W typ
C
(1) _{Junction temperature = ambient for +25°C tested specifications.}
(2) _{Junction temperature = ambient at low temperature limit; junction temperature = ambient +23°C at high temperature limit for over temperature}
tested specifications.
(3) _{Test levels: (A) 100% tested at +25°C. Over temperature limits by characterization and simulation. (B) Limits set by characterization and}
simulation. (C) Typical value only for information.
(4) _{Current is considered positive-out-of-node. VCM is the input common-mode voltage.}
(5) _{Tested < 3dB below minimum CMRR specification at ± CMIR limits.}
(6) _{Heat slug soldered to heat spreading plane. This plane should be electrically floating or at VS− voltage.}
4